Polished Glass to Glass 90 Degree Internal Angle Pool Fence Gate Latch

• Glass to Glass at a 90 Degree Internal Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are Polished 316 Stainless Steel
• Latch is Black Polymer
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

Product ID: MR-FL90I-P

Polished Glass to Glass Soft Close Hinge

Polaris S155 Series – Polished Stainless Soft Close Glass-to-Glass Pool Fence Hinges

Turn your economy gate into a premium soft-close system!

Product Highlights:

• NEW & Innovative Design – Instantly upgrade standard or economy pool gates with a soft-close system.
• Retrofit-Friendly – Multiple hole spacings for easy replacement of existing hinges—no new drilling required. (see images for glass hole positions)
• Hydraulic Soft-Close Technology – Smooth, quiet, and controlled closing action for added safety and style.
• Glass-to-Glass Mounting – Perfect for 8–12mm toughened glass panels in frameless pool fencing.
• Heavy-Duty Performance – Supports gates up to 45kg and 1000mm wide.
• 316 Marine Grade Stainless Steel – Rust-resistant and ideal for coastal or saltwater pool environments.
• Fully Adjustable – Fine-tune gate tension and alignment with built-in tools for perfect operation.
• Standards Compliant – Exceeds Australian Safety Standard AS1926.1-2012 for pool fencing.

What’s Included:

• 2 × Polaris S155 Soft Close Hinges
• 1 × Adjustment Tool Kit
• 1 × Installation Manual

Ideal For:

• Retrofitting existing pool gates with spring hinges
• Frameless glass pool fencing systems
• Residential & commercial installations
• Coastal, high-moisture, and saltwater environments

Product ID: PSC-S155-GG-P

Polished Glass to Round Post Soft Close Hinge

Polaris S155 Series – Polished Soft Close Glass-to-Round Post Pool Fence Hinges

Turn your economy gate into a premium soft-close system!

Product Highlights:

• NEW & Innovative Design – Instantly upgrade standard or economy pool gates with a soft-close system.
• Retrofit-Friendly – Multiple hole spacings for easy replacement of existing hinges—no new drilling required. (See images for glass hole positions)
• Hydraulic Soft-Close Technology – Smooth, quiet, and controlled closing action for added safety and style.
• Glass-to-Glass Mounting – Perfect for 8–12mm toughened glass panels in frameless pool fencing.
• Heavy-Duty Performance – Supports gates up to 45kg and 1000mm wide.
• 316 Marine Grade Stainless Steel – Rust-resistant and ideal for coastal or saltwater pool environments.
• Fully Adjustable – Fine-tune gate tension and alignment with built-in tools for perfect operation.
• Stylish Finish Options – Polished Stainless.
• Standards Compliant – Exceeds Australian Safety Standard AS1926.1-2012 for pool fencing.

What’s Included:

• 2 × Polaris S155 Soft Close Hinges
• 1 × Adjustment Tool Kit
• 1 × Installation Manual

Ideal For:

• Retrofitting existing pool gates with spring hinges
• Frameless glass pool fencing systems
• Residential & commercial installations
• Coastal, high-moisture, and saltwater environments

Product ID: PSC-S155-RP-P

Polished Glass to Wall Soft Close Hinge

Polaris S155 Series – Polished Stainless Soft Close Glass-to-Wall Pool Fence Hinges

Turn your economy gate into a premium soft-close system!

Product Highlights:

• NEW & Innovative Design – Instantly upgrade standard or economy pool gates with a soft-close system.
• Retrofit-Friendly – Multiple hole spacings for easy replacement of existing hinges—no new drilling required. (See images for glass hole positions)
• Hydraulic Soft-Close Technology – Smooth, quiet, and controlled closing action for added safety and style.
• Glass-to-Glass Mounting – Perfect for 8–12mm toughened glass panels in frameless pool fencing.
• Heavy-Duty Performance – Supports gates up to 45kg and 1000mm wide.
• 316 Marine Grade Stainless Steel – Rust-resistant and ideal for coastal or saltwater pool environments.
• Fully Adjustable – Fine-tune gate tension and alignment with built-in tools for perfect operation.
• Stylish Finish Options Polished Stainless
• Standards Compliant – Exceeds Australian Safety Standard AS1926.1-2012 for pool fencing.

What’s Included:

• 2 × Polaris S155 Soft Close Hinges
• 1 × Adjustment Tool Kit
• 1 × Installation Manual

Ideal For:

• Retrofitting existing pool gates with spring hinges
• Frameless glass pool fencing systems
• Residential & commercial installations
• Coastal, high-moisture, and saltwater environments

Product ID: PSC-S155-W-P

Polished Round Base Plated Spigot with Cover for Glass Balustrade or Pool Fence

Use on glass balustrading or pool fencing.

• Polished Stainless Finish
• Easy Top Mount Base Plate Installation
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 50mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Suitable for Glass Balustrade or Pool Fence Applications
• Load test certificates available if required.

Includes 18mm High Cover

Click Here to view our Base Plate Spigot Installation Guide

Product ID: RIO-SBP-P/RIO-HDC-P

Polished Sliding Shower Installation Kit

Kit Includes:

• 2 x Door Upper Rollers
• 2 x Door Stabiliser Guides
• 2 x Fixed Panel Rail Connectors
• 2 x Stoppers
• 1 x Recessed Round Handle
• 1 x Floor Guide
• 2 x Rail Wall Brackets

Product ID: STAL-KIT

Polished Square Base Plate Spigot With Black Insulator

Stainless Steel Square Base Plate Spigot plus a thermoplastic non-conductive insulating sleve that fits over the top. 

Cover Specifications

• Made from ASA thermoplastic – excellent weather & chemical resistance and high impact strength
• Non-conductive material
• Includes 1x vertical spigot stem & 2·part domical cover
• Also includes 2x caps which fit into friction grub screw holes
• Firstly install vertical stem to spigot. Fix off base plate with countersunk fixings to substrate. Install the 2 part domical cover.
• Can be retro fitted to existing base plate Madrid spigots
• Specialty designed top section prevents chance of pulling insulating cover away from spigot and base plate

Select to colour match the spigot to the cover if you plan on removing the cover at a later date.

You will not need to earth your spigot if you use this product.

Product ID: POOLMAD-SBP-P / MAD-INS-BP-B

Polished Square Base Plate Spigot With Silver Gloss Insulator

Stainless Steel Square Base Plate Spigot plus a thermoplastic non-conductive insulating sleve that fits over the top. 

Cover Specifications

• Made from ASA thermoplastic – excellent weather & chemical resistance and high impact strength
• Non-conductive material
• Includes 1x vertical spigot stem & 2·part domical cover
• Also includes 2x caps which fit into friction grub screw holes
• Firstly install vertical stem to spigot. Fix off base plate with countersunk fixings to substrate. Install the 2 part domical cover.
• Can be retro fitted to existing base plate Madrid spigots
• Specialty designed top section prevents chance of pulling insulating cover away from spigot and base plate

Select to colour match the spigot to the cover if you plan on removing the cover at a later date.

You will not need to earth your spigot if you use this product.

Product ID: POOLMAD-SBP-P / MAD-INS-BP-SG

Polished Square Base Plate Spigot With Silver Gloss Insulator

Stainless Steel Square Base Plate Spigot plus a thermoplastic non-conductive insulating sleve that fits over the top. 

Cover Specifications

• Made from ASA thermoplastic – excellent weather & chemical resistance and high impact strength
• Non-conductive material
• Includes 1x vertical spigot stem & 2·part domical cover
• Also includes 2x caps which fit into friction grub screw holes
• Firstly install vertical stem to spigot. Fix off base plate with countersunk fixings to substrate. Install the 2 part domical cover.
• Can be retro fitted to existing base plate Madrid spigots
• Specialty designed top section prevents chance of pulling insulating cover away from spigot and base plate

Select to colour match the spigot to the cover if you plan on removing the cover at a later date.

You will not need to earth your spigot if you use this product.

Product ID: POOLMAD-SBP-P / MAD-INS-SG

Polished Square Base Plate Spigot With White Insulator

Stainless Steel Square Base Plate Spigot plus a thermoplastic non-conductive insulating sleve that fits over the top. 

Cover Specifications

• Made from ASA thermoplastic – excellent weather & chemical resistance and high impact strength
• Non-conductive material
• Includes 1x vertical spigot stem & 2·part domical cover
• Also includes 2x caps which fit into friction grub screw holes
• Firstly install vertical stem to spigot. Fix off base plate with countersunk fixings to substrate. Install the 2 part domical cover.
• Can be retro fitted to existing base plate Madrid spigots
• Specialty designed top section prevents chance of pulling insulating cover away from spigot and base plate

Select to colour match the spigot to the cover if you plan on removing the cover at a later date.

You will not need to earth your spigot if you use this product.

Product ID: POOLMAD-SBP-P / MAD-INS-BP-W

Polished Square Base Plated Spigot For 15mm Glass Balustrade

• Easy Top Mount Base Plate Installation
• Polished Stainless Steel Finish
• Use for 15mm Glass Balustrade
• Friction Fit Glass (no holes in glass required)
• Suits 15mm thick glass
• 2205 Grade Stainless Steel
• 45mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Load test certificates available if required.

Click Here to view to Base Plate Spigot installation guide

Product ID: MADDEL-SBP-P

Polished Square Base Plated Spigot For 15mm Glass Balustrade with Cover

• Easy Top Mount Base Plate Installation
• Polished Stainless Steel Finish
• Use for 15mm Glass Balustrade
• Friction Fit Glass (no holes in glass required)
• Suits 15mm thick glass
• 2205 Grade Stainless Steel
• 45mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Load test certificates available if required.

Click Here to view to Base Plate Spigot installation guide

Product ID: MADDEL-SBP-P/MADDEL-HDC-P

Polished Square Base Plated Spigot for Glass Balustrade or Pool Fence

• Easy Top Mount Base Plate Installation
• Suitable for Glass Balustrade or Glass Pool Fence Applications
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 45mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Load test certificates available if required.

Click Here to view to Base Plate Spigot installation guide

Product ID: MAD-SBP-P

Polished Square Base Plated Spigot with Cover for Glass Balustrade or Pool Fence

• Easy Top Mount Base Plate Installation
• Suitable for Glass Balustrade or Glass Pool Fence Applications
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 45mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Load test certificates available if required.

Includes a 100x100 x 22mm Cover 

Click Here to view to Base Plate Spigot installation guide

Product ID: MAD-SBP-P/MAD-HDC-P

Polished Square Core Hole Stainless Spigot for 15mm Glass Balustrade

Square Core Hole Spigot for 15mm Glass

• Suits 15mm Thick Glass
• Polished Stainless Finish
• Friction Fit - No holes in Glass Required
• Use for Glass Balustrade
• 2205 Grade Stainless Steel
• 45mm Front profile
• Extension available for extra height or anchoring
• Use for Glass Balustrading
• Load test certificates available if required.

Click Here to view our Core Hole Installation Guide

Product ID: MADDEL-S-P

Polished Square Core Hole Stainless Spigot for 15mm Glass Balustrade with Dress Ring

Square Core Hole Spigot for 15mm Glass

• Suits 15mm Thick Glass
• Polished Stainless Steel
• Includes a 105x105mm Dress Ring
• Friction Fit - No holes in Glass Required
• Use for Glass Balustrade
• 2205 Grade Stainless Steel
• 45mm Front profile
• Extension available for extra height or anchoring
• Use for Glass Balustrading
• Load test certificates available if required.

Click Here to view our Core Hole Installation Guide

Product ID: MADDEL-S-P/MADDEL-DR-P

Polished Square Core Hole Stainless Spigot for Glass Balustrade or Glass Pool Fence

Square Core Hole Spigot

• Friction Fit - No holes in Glass Required
• Suitable for Glass Balustrade or Glass Pool Fence Applications
• 2205 Grade Stainless Steel
• Suits 12mm Thick Glass
• 45mm Front profile
• Extension available for extra height or anchoring
• Load test certificates available if required.

Click Here to view our Core Hole Installation Guide

Product ID: MAD-S-P

Polished Square Core Hole Stainless Spigot with Dress Ring for Glass Balustrade or Glass Pool Fence

Square Core Hole Spigot

• Friction Fit - No holes in Glass Required
• Suitable for Glass Balustrade or Glass Pool Fence Applications
• 2205 Grade Stainless Steel
• Suits 12mm Thick Glass
• 45mm Front profile
• Extension available for extra height or anchoring
• Load test certificates available if required.

Click Here to view our Core Hole Installation Guide

Product ID: MAD-S-P/MAD-DR-P

Polished Square Top Fix Spigot for 12mm to 17.52mm Glass with M12 Threaded Rod

• Suits 15mm to 17.52mm Thick Glass 
• Friction Fit
• Ideal for steel beam installation: Bolt from underside of beam
• Made from Duplex Stainless Steel 2205 grade

Click Here to view the installation guide

Product ID: MADDEL-TF-P/GS120ROD

Polished Square Top Fix Spigot for 12mm to 17.52mm Glass with Timber Fixing Screw

• Suits 15mm to 17.52mm Thick Glass 
• Friction Fit
• Ideal for steel beam installation: Bolt from underside of beam
• Made from Duplex Stainless Steel 2205 grade

Click Here to view the installation guide

Product ID: MADDEL-TF-P/GS160LAG

Polished Stainless 25x21mm 5800mm Long Slotted Rectangle Tube for Glass Balustrade / Pool Fence Top Rail

• Polished Stainless Steel Finish
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fits directly onto the top of the glass
• 316 grade Stainless Steel
• 14x14mm Slot
• Install with glazing rubber or silicon directly to the glass

Product ID: STG-R5800-2521-P

Polished Stainless Bottom Seat for D Front Glass Clamps

• Polished Stainless Steel
• Install in the bottom of the glass clamp for the glass to sit on to stop the glass from slipping
• When used the glass clamp needs to be installed at the very bottom corner of the glass panel
• Required for heavy glass panels
• Suits our D Front Polished Stainless Steel Glass Clamps

Product ID: GC-D-SEAT-P

Polished Stainless Bottom Seat for Square Front Glass Clamps

• Polished Stainless Steel
• Install in the bottom of the glass clamp for the glass to sit on to stop the glass from slipping
• When used the glass clamp needs to be installed at the very bottom corner of the glass panel
• Required for heavy glass panels
• Suits our Square Front Polished Finish Glass Clamps

Product ID: GC-S-SEAT-P

Polished Stainless Deluxe Double Friction Square Base Plate Spigots (Pool Fence Only)

• Square Base Plate Pool Fence Spigot
• Double Friction for fast installation and easy tilt adjustment and alignment.
• 2205 Duplex Stainless Steel
• Mirror Polished Stainless Steel
• Includes a 22mm High Spigot Cover
• Multiple fixing points in base plate allows for easy installation
• Includes terminal for quick and easy earthing if required

Product ID: LS-DF-SBP-P

Polished Stainless Deluxe Double Friction Square Base Plate Spigots with Screws (Pool Fence Only)

• Square Base Plate Pool Fence Spigot
• Double Friction for fast installation and easy tilt adjustment and alignment.
• 2205 Duplex Stainless Steel
• Mirror Polish Stainless Steel
• Includes a 22mm High Spigot Cover
• Multiple fixing points in base plate allows for easy installation
• Includes terminal for quick and easy earthing if required

Includes 4 x 10mm x 100mm Countersunk Screws for timber installation

Product ID: LS-DF-SBP-PLS-DF-SBP-P / CSK-100-4PK

Polished Stainless Deluxe Double Friction Square Base Plate Spigots with Threaded Rods (Pool Fence Only)

• Square Base Plate Pool Fence Spigot
• Double Friction for fast installation and easy tilt adjustment and alignment.
• 2205 Duplex Stainless Steel
• Mirror Polish Stainless Steel
• Includes a 22mm High Spigot Cover
• Multiple fixing points in base plate allows for easy installation
• Includes terminal for quick and easy earthing if required

Includes 4 x M10 x 120mm stainless steel threaded rods, nuts and washers for concrete or steel installation

Product ID: LS-DF-SBP-P / S-120ROD-4PK

Polished Stainless Deluxe Double Friction Square Core Hole Spigot (Pool Fence Only)

• Pool Fence Square Core Hole Spigot
• Double Friction for easy tilt adjustment and alignment
• Mirror Polished 2205 Duplex Stainless Steel
• Bottom M10 Bolt provides up to 60mm of vertical height adjustment or remove to attach a spigot extender
• Recessed friction plates provide a neat finish and easy installation
• Includes terminal for quick and easy earthing if required

Product ID: LS-DF-S-P

Polished Stainless Deluxe Double Friction Square Core Hole Spigot with Dress Ring (Pool Fence Only)

• Pool Fence Square Core Hole Spigot
• Double Friction for easy tilt adjustment and alignment
• Mirror Polished 2205 Duplex Stainless Steel
• Bottom M10 Bolt provides up to 60mm of vertical height adjustment or remove to attach a spigot extender
• Recessed friction plates provide a neat finish and easy installation
• Includes terminal for quick and easy earthing if required

Includes a 100x100mm Dress Ring to cover your grout hole

Product ID: LS-DF-S-P / MAD-DR-P

Polished Stainless Edge Mount Spigot

Product ID: MAD-FACEM-P

Polished Stainless Glass to Glass 90 Degree External Latch

• Glass to Glass at a 90 Degree External Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

Product ID: MR-FL90E-P

Polished Stainless Glass to Glass Pool Fence Deluxe Latch

• Deluxe Polished Stainless Glass to Glass Latch - Straight Line
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Both Backing plates and latch are 316 Stainless Steel
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

View Technical Drawings Here

View Installation Instructions Here

Product ID: LAT180-P

Polished Stainless Glass to Glass Pool Fence Economy Latch

Product ID: MR-FLGG-P

Polished Stainless Glass to Glass Spring Hinge

• Glass to Glass Gate Hinge
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• Suits 12mm Hinge Panel
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• Hinge panel needs to be drilled 4 x 14mm Holes (40mm in from the side and 60mm apart)
• For best results allow for a 10mm gap between the hinge panel and gate

Product ID: MR-GGH-P

Polished Stainless Glass to Wall Pool Fence Deluxe Latch

• Glass to Wall/Square Post
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are powder coated 316 Stainless Steel
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

View Technical Drawings Here

View Installation Instructions Here

Product ID: LATWALL-P

Polished Stainless Glass to Wall Pool Fence Economy Latch

• Polished Stainless Glass to Wall/Square Post Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates 316 Stainless Steel
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

Product ID: MR-WGL-P

Polished Stainless Glass to Wall/Post Spring Hinge

• Polished Stainless Steel
• Glass to Wall/Square Post
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 22mm between the gate and post

Product ID: MR-SPH-P

Polished Stainless Polaris 125 Series Glass/Glass Hinges

• 2205 grade stainless steel
• Self closing pool fence compliant safety hinge
• Tested to cycle count Australian Standards requirements
• Adjustable closing speed with European dampeners providing a soft close action
• Cone cap incorporated on bottom hinge for anti-toe hold
• Suits 10 or 12mm thick glass gates (max 45kg)

Click Here to View an installation video of these hinges

Product ID: PSC-125GG-P

Polished Stainless Polaris 125 Series Glass/Wall Hinges

• Polished Stainless Steel Finish
• 2205 grade stainless steel
• 4x fixing holes to wall/post
• Self closing pool fence compliant safety hinge
• Tested to cycle count Australian Standards requirements
• Adjustable closing speed with European dampeners providing a soft close action
• Polymer cone cap supplied and can be fitted on bottom hinge for anti-toe hold
• Suits 10 or 12mm thick glass gates (max 45kg)
• Easy gate installation: firstly, fit hinges to gate and place gate in proposed position. Once in correct position, screw off to wall/post through 2 x outer holes. Then open the gate and screw off through 2 x inner holes.

Select to add a post adapter if you are using a 50mm round or 50x50 Square post.

Note: You will need to use a Deluxe Soft Close Glass to Wall Gate Panel with these hinges. The cut out in the glass needs to match the cut out specified for these hinges.

Product ID: PSC-125W-P

Polished Stainless Polaris 125 Series Glass/Wall Hinges with Round Post Adapter Plate

Includes Hinges + 50mm Round Post Adapter

• Polished Stainless Steel Finish
• 2205 grade stainless steel
• 4x fixing holes to wall/post
• Self closing pool fence compliant safety hinge
• Tested to cycle count Australian Standards requirements
• Adjustable closing speed with European dampeners providing a soft close action
• Polymer cone cap supplied and can be fitted on bottom hinge for anti-toe hold
• Suits 10 or 12mm thick glass gates (max 45kg)
• Easy gate installation: firstly, fit hinges to gate and place gate in proposed position. Once in correct position, screw off to wall/post through 2 x outer holes. Then open the gate and screw off through 2 x inner holes.

Note: You will need to use a Deluxe Soft Close Glass to Wall Gate Panel with these hinges. The cut out in the glass needs to match the cut out specified for these hinges.

Product ID: PSC-125W-P / PSC-125PLATE-RP-P

Polished Stainless Polaris 125 Series Glass/Wall Hinges with Square Post Adapter Plate

Includes Hinges + 50mm Square Post Adapter

• Polished Stainless Steel Finish
• 2205 grade stainless steel
• 4x fixing holes to wall/post
• Self closing pool fence compliant safety hinge
• Tested to cycle count Australian Standards requirements
• Adjustable closing speed with European dampeners providing a soft close action
• Polymer cone cap supplied and can be fitted on bottom hinge for anti-toe hold
• Suits 10 or 12mm thick glass gates (max 45kg)
• Easy gate installation: firstly, fit hinges to gate and place gate in proposed position. Once in correct position, screw off to wall/post through 2 x outer holes. Then open the gate and screw off through 2 x inner holes.

Note: You will need to use a Deluxe Soft Close Glass to Wall Gate Panel with these hinges. The cut out in the glass needs to match the cut out specified for these hinges.

Product ID: PSC-125W-P / PSC-125PLATE-SP-P

Polished Stainless Round Base Plated Spigot for Glass Balustrade or Pool Fence

Use on glass balustrading or pool fencing.

• Polished Stainless Finish
• Easy Top Mount Base Plate Installation
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 50mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Suitable for Glass Balustrade or Pool Fence Applications
• Load test certificates available if required.

Click Here to view our Base Plate Spigot Installation Guide

Product ID: RIO-SBP-P

Polished Stainless Round Base Plated Spigot With Cover and Fixing Rods for Glass Balustrade or Pool Fence

Use on glass balustrading or pool fencing.

• Polished Stainless Finish
• Easy Top Mount Base Plate Installation
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 50mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Suitable for Glass Balustrade or Pool Fence Applications
• Load test certificates available if required.

Includes 18mm High Cover and 4 x Fixing Rods, Nuts and Washers for Concrete Installation

Click Here to view our Base Plate Spigot Installation Guide

Product ID: RIO-SBP-P/RIO-HDC-P/S-120ROD-4PK

Polished Stainless Round Base Plated Spigot With Cover and Fixing Screws for Glass Balustrade or Pool Fence

Use on glass balustrading or pool fencing.

• Polished Stainless Finish
• Easy Top Mount Base Plate Installation
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 50mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Suitable for Glass Balustrade or Pool Fence Applications
• Load test certificates available if required.

Includes 18mm High Cover and Timber Fixing Screws

Click Here to view our Base Plate Spigot Installation Guide

Product ID: RIO-SBP-P/RIO-HDC-P/CSK-100-4PK

Polished Stainless Round Base Plated Spigot With Fixing Rods for Glass Balustrade or Pool Fence

Use on glass balustrading or pool fencing.

• Polished Stainless Finish
• Easy Top Mount Base Plate Installation
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 50mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Suitable for Glass Balustrade or Pool Fence Applications
• Load test certificates available if required.

Includes 18mm High Cover and 4 x Fixing Rods, Nuts and Washers for Concrete Installation

Click Here to view our Base Plate Spigot Installation Guide

Product ID: RIO-SBP-P/S-120ROD-4PK

Polished Stainless Round Base Plated Spigot With Screws for Glass Balustrade or Pool Fence

Use on glass balustrading or pool fencing.

• Polished Stainless Finish
• Easy Top Mount Base Plate Installation
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 50mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Suitable for Glass Balustrade or Pool Fence Applications
• Load test certificates available if required.

Includes 4 x 10mm x 100mm Stainless Steel Screws for Timber Installation

Click Here to view our Base Plate Spigot Installation Guide

Product ID: RIO-SBP-P/CSK-100-4PK

Pool Area CPR Sign

Royal Life Savings Resuscitation Chart

Product ID: CPR

Pool Pump Storage Basalt