White Deluxe Glass to Glass 90 Degree Internal Angle Pool Fence Gate Latch

• Glass to Glass at a 90 Degree Internal Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

View Technical Drawings Here

View Installation Instructions Here

Product ID: LAT90INT-W

White Extended BARR C Bracket Kit (4 pack)

• Extended “C” bracket design for neat panel-to-post or wall fixing
• Powder-coated White
• Made from high-strength extruded aluminium
• A stylish alternative to traditional full shroud brackets
• Includes 4 x Extended “C” brackets with matching stainless steel screws
• Fixing hardware:
  • 8 x SS304 Countersunk Screw (for aluminium posts)
  • 8 x SS304 Square Drive Panhead Screws (for panel rails)
• Rust-resistant and pool fencing compliant
• Ideal for use with Barr Aluminium Pool Fencing systems

Product ID: BR-BR60-W-4PK

White Face Mount Spigot with Tilt Adjustment and M12 Concrete Installation Kit

• Duplex Stainless Steel 2205
• Face mount spigot – fix to vertical surface of concrete, timber/steel beams or bearers
• 2 part spigot for easy install: (1) rear plate fixed to vertical surface (2) spigot attaches to rear plate with 2 x M8 counter sunk screws
• Tilt Adjustable – innovative design allows for tilt adjustment by simply turning top & bottom M8 grub screws
• Glass alignment adjustability is a huge installation advantage
• Timber/beam fixing – 2 x fixing points in the rear plate for increased strength
• Concrete fixing – ideal for narrow slabs with 1 x sturdy M18 fixing
• Neat finish – slide in cover plate hides exposed screws on spigot front
• Earthing terminal included
• 3mm stackable horseshoe packers sold separately that can be inserted behind rear plate to overcome uneven vertical surfaces

Click Here to View Spigot Brochure

Click Here to View Installation Instructions

Product ID: MAD-TILT-S-MW/MAD-TILT-M12-BALKIT

White Face Mount Spigot with Tilt Adjustment and M12 Timber Installation Kit

• Duplex Stainless Steel 2205
• Face mount spigot – fix to vertical surface of concrete, timber/steel beams or bearers
• 2 part spigot for easy install: (1) rear plate fixed to vertical surface (2) spigot attaches to rear plate with 2 x M8 counter sunk screws
• Tilt Adjustable – innovative design allows for tilt adjustment by simply turning top & bottom M8 grub screws
• Glass alignment adjustability is a huge installation advantage
• Timber/beam fixing – 2 x fixing points in the rear plate for increased strength
• Concrete fixing – ideal for narrow slabs with 1 x sturdy M18 fixing
• Neat finish – slide in cover plate hides exposed screws on spigot front
• Earthing terminal included
• 3mm stackable horseshoe packers sold separately that can be inserted behind rear plate to overcome uneven vertical surfaces

Click Here to View Spigot Brochure

Click Here to View Installation Instructions

Product ID: MAD-TILT-S-MW/MAD-TILT-M12KIT

White Face Mount Spigot with Tilt Adjustment and M18 Concrete Installation Kit

• Duplex Stainless Steel 2205
• Face mount spigot – fix to vertical surface of concrete, timber/steel beams or bearers
• 2 part spigot for easy install: (1) rear plate fixed to vertical surface (2) spigot attaches to rear plate with 2 x M8 counter sunk screws
• Tilt Adjustable – innovative design allows for tilt adjustment by simply turning top & bottom M8 grub screws
• Glass alignment adjustability is a huge installation advantage
• Timber/beam fixing – 2 x fixing points in the rear plate for increased strength
• Concrete fixing – ideal for narrow slabs with 1 x sturdy M18 fixing
• Neat finish – slide in cover plate hides exposed screws on spigot front
• Earthing terminal included
• 3mm stackable horseshoe packers sold separately that can be inserted behind rear plate to overcome uneven vertical surfaces

Click Here to View Spigot Brochure

Click Here to View Installation Instructions

Product ID: MAD-TILT-S-MW/MAD-TILT-M18KIT

White Glass to Glass 90 Degree Internal Angle Pool Fence Gate Latch

• Glass to Glass at a 90 Degree Internal Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are White Powder Coated 316 Stainless Steel
• Latch is White Polymer
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

Product ID: MR-FL90I-MW

White Horizontal Swivel Bracket for 38x25mm Rails

Product ID: SS-BSWIV-HORIZ-W

White Square Base Plate Spigot With White Insulator

Stainless Steel Square Base Plate Spigot plus a thermoplastic non-conductive insulating sleve that fits over the top. 

Cover Specifications

• Made from ASA thermoplastic – excellent weather & chemical resistance and high impact strength
• Non-conductive material
• Includes 1x vertical spigot stem & 2·part domical cover
• Also includes 2x caps which fit into friction grub screw holes
• Firstly install vertical stem to spigot. Fix off base plate with countersunk fixings to substrate. Install the 2 part domical cover.
• Can be retro fitted to existing base plate Madrid spigots
• Specialty designed top section prevents chance of pulling insulating cover away from spigot and base plate

Select to colour match the spigot to the cover if you plan on removing the cover at a later date.

You will not need to earth your spigot if you use this product.

Product ID: MAD-SBP-MW / MAD-INS-BP-W

White Square Base Plated Spigot for Glass Balustrade or Pool Fence

• Easy Top Mount Base Plate Installation
• Suitable for Glass Balustrade or Glass Pool Fence Applications
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 45mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Load test certificates available if required.

Click Here to view to Base Plate Spigot installation guide

Product ID: MAD-SBP-MW

White Square Base Plated Spigot with Cover for Glass Balustrade or Pool Fence

• Easy Top Mount Base Plate Installation
• Suitable for Glass Balustrade or Glass Pool Fence Applications
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 45mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Load test certificates available if required.

Includes a 100x100 x 22mm Cover

Click Here to view to Base Plate Spigot installation guide

Product ID: MAD-SBP-MW/MAD-HDC-MW

White Square Core Hole Stainless Spigot for 15mm Glass Balustrade

Square Core Hole Spigot for 15mm Glass

• Suits 15mm Thick Glass
• Matt White Finish
• Friction Fit - No holes in Glass Required
• Use for Glass Balustrade
• 2205 Grade Stainless Steel
• 45mm Front profile
• Extension available for extra height or anchoring
• Use for Glass Balustrading
• Load test certificates available if required.

Click Here to view our Core Hole Installation Guide

Product ID: MADDEL-S-MW

White Square Core Hole Stainless Spigot for 15mm Glass Balustrade with Dress Ring

Square Core Hole Spigot for 15mm Glass

• Suits 15mm Thick Glass
• Matt White Finish
• Includes 105x105mm Dress Ring
• Friction Fit - No holes in Glass Required
• Use for Glass Balustrade
• 2205 Grade Stainless Steel
• 45mm Front profile
• Extension available for extra height or anchoring
• Use for Glass Balustrading
• Load test certificates available if required.

Click Here to view our Core Hole Installation Guide

Product ID: MADDEL-S-MW/MADDEL-DR-MW

White Square Core Hole Stainless Spigot for Glass Balustrade or Glass Pool Fence

Square Core Hole Spigot

• Friction Fit - No holes in Glass Required
• Suitable for Glass Balustrade or Glass Pool Fence Applications
• 2205 Grade Stainless Steel
• Suits 12mm Thick Glass
• 45mm Front profile
• Extension available for extra height or anchoring
• Load test certificates available if required.

Click Here to view our Core Hole Installation Guide

Product ID: MAD-S-MW

White Square Core Hole Stainless Spigot with Dress Ring for Glass Balustrade or Glass Pool Fence

Square Core Hole Spigot

• Friction Fit - No holes in Glass Required
• Suitable for Glass Balustrade or Glass Pool Fence Applications
• 2205 Grade Stainless Steel
• Suits 12mm Thick Glass
• 45mm Front profile
• Extension available for extra height or anchoring
• Load test certificates available if required.

Click Here to view our Core Hole Installation Guide

Product ID: MAD-S-MW/MAD-DR-MW

White Square Front, Flat Back Glass Clamp for Glass Balustrade / Pool Fence

• Flat back for installation onto timber or steel post or brick wall
• Use for Glass Balustrade / Pool Fence
• Suitable for 8, 10 and 12mm Glass - Gaskets provided
• Allow a minimum gap of 16mm and maximum gap of 25mm between the post and the glass
• White Powder Coated 316 Marine Grade Stainless Steel

This Glass Clamp is also available in:

• Stainless Steel
• Matt Black

Product ID: GC-S-FB-MW

White Square Top Fix Spigot for 12mm to 17.52mm Glass with M12 Threaded Rod

• Suits 15mm to 17.52mm Thick Glass 
• Friction Fit
• Ideal for steel beam installation: Bolt from underside of beam
• Made from Duplex Stainless Steel 2205 grade

Click Here to view the installation guide

Product ID: MADDEL-TF-MW/GS120ROD

White Square Top Fix Spigot for 12mm to 17.52mm Glass with Timber Fixing Screw

• Suits 15mm to 17.52mm Thick Glass 
• Friction Fit
• Ideal for steel beam installation: Bolt from underside of beam
• Made from Duplex Stainless Steel 2205 grade

Click Here to view the installation guide

Product ID: MADDEL-TF-MW/GS160LAG

White Stainless Glass to Glass Pool Fence Deluxe Latch

• Deluxe Matt White Glass to Glass Latch - Straight Line
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Both Backing plates and latch are 316 Stainless Steel
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

View Technical Drawings Here

View Installation Instructions Here

Product ID: LAT180-W

White Stainless Glass to Wall Pool Fence Deluxe Latch

• Glass to Wall/Square Post
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are powder coated 316 Stainless Steel
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

View Technical Drawings Here

View Installation Instructions Here

Product ID: LATWALL-W

White Top Pull Lockable Latch (D&D)

Product ID: ML-TL-W

White Tru Close Hinge Set - 2 Alignment legs

Product ID: TC-H-AT-2L-W

White Vertical Swivel Bracket for 38x25mm Rails

Product ID: SS-BSWIV-VERT-W