Mill Finish Flat Wall Plate for 35x35mm Aluminium Glass Top Rail

• Flat Wall Plate
• Mill finish - Suitable for Powder coating to any colour of your choice.
• Ideal when it is a tight gap between the glass and the wall and a standard wall bracket will not fit
• 105mm W x 35mm H x 5mm T
• 2 Pcs per pack (1 x left and 1 x right handed)
• Screws to the end of the rail via 2 x Countersunk Holes in the wall bracket.
• 1 x 6.5mm Counter Sunk Fixing Hole
• Includes 4 x CSK Fixing Screws for securing the plates to the rail

Product ID: SER35-WPLATE-M-2PK

Mill Finish Versatilt Deck Mount Channel Kit

Product ID: VER-4200-DMK-M

Mill Finish Wall Bracket for 35x35mm Aluminium Glass Top Rail

• Wall Bracket
• Mill finish - Suitable for Powder coating to any colour of your choice.
• 43mm W x 63mm H x 25mm D
• Rail fits inside the bracket cavity
• Internal cavity depth: 25mm
• 1 x 6.5mm Counter Sunk Fixing Hole
• Includes one pointed grub screw to secure bracket to rail

Product ID: SER35-WB-M

Mill Versatilt Deck Mount End Caps

Product ID: VER-2DMEP-M

Mill Versatilt Face Mount End Caps

Product ID: VER-2FMEP-M

Monument 1200mm Aluminium Gate Converters

1200mm High Aluminium Gate Converter Kit – Pair

Easily transform your 1200mm high flat-top aluminium fence panel into a custom-width gate with this DIY converter kit. Designed for panels with 38x25mm horizontal rails, it offers a cost-effective alternative to custom-made gates.

Features:

• Converts standard fence panels into gates up to 1500mm wide
• Compatible with 1200mm high panels featuring 38x25mm horizontal rails
• Simple installation: cut panel to size, insert converters, and secure with included screws
• Pool fence compliant when used with a 1200mm high panel and a gap of 80mm or less between picket edge and inner gate stile edge
• Durable powder-coated aluminium construction
• Includes: 2 converters (left & right) and 4 screws

Note: Hinges and latch sold separately.

Product ID: SS-1200-GC-2PK-MN

Monument 1300mm Base Plate Aluminium Post

Product ID: SS-1300-BP-MN

Monument 1300mm Base Plate Aluminium Post with Cover

Product ID: SS-1300-BP-MN/SS-DC-MN

Monument 1300x1900mm Perforated Pool Fence Transition Kit with Brackets

• 1 x Monument Perforated Aluminium Panel (1288mm x 1888mm)
• 1 x Monument Kit – provides a smooth, finished border
• 4 x Monument Post Brackets – ideal for direct post-to-post installation
• 50 x Monument Stainless Steel Screws – built for outdoor conditions

Key Features:

• Maximum Panel Size: 1300mm (W) x 1900mm (H)
• Constructed from high-grade, powder-coated aluminium
• Low-maintenance, rust-resistant, and built for outdoor performance
• Fully compliant with Australian Standard AS1926.1 for pool safety
• Simple installation – perfect for DIY or professional projects
• Suitable for residential and commercial applications

Click Here to view installation and cutting instructions.

Product ID: PP-PANEL-TRANS-MN/PP-TRANSKIT-MN/SS-BH4-MN/PP-SCREW-MN-50PK

Monument 1300x1900mm Perforated Pool Fence Transition Kit with Channels

• 1 x Monument Perforated Aluminium Panel (1288mm x 1888mm)
• 1 x Monument Framing Kit – delivers a clean, enclosed finish
• 2 x Monument U Channels – for secure side-mount framing
• 50 x Monument Stainless Steel Screws – corrosion-resistant for long-term use

Key Features:

• Maximum Panel Size: 1300mm (W) x 1900mm (H)
• Constructed from high-grade, powder-coated aluminium
• Low-maintenance, rust-resistant, and built for outdoor performance
• Fully compliant with Australian Standard AS1926.1 for pool safety
• Simple installation – perfect for DIY or professional projects
• Suitable for residential and commercial applications

Click Here to view installation and cutting instructions.

Product ID: PP-PANEL-TRANS-MN/PP-TRANSKIT-MN/PP-U-MN-2PK/PP-SCREW-MN-50PK

Monument 1600mm Base Plate Aluminium Post

Product ID: SS-1600-BP-MN

Monument 1600mm Base Plate Aluminium Post with Cover

Product ID: SS-1600-BP-MN/SS-DC-MN

Monument 1800mm In-Ground Aluminium Post

Product ID: SS-1800-MN

Monument 1800mm In-Ground Aluminium Post with Dress Ring

Product ID: SS-1800-B/XP-DR-MN

Monument 2000x1200mm Perforated Pool Fence Panel Kit with Brackets

Kit Includes:

• 1 x Monument Plain Perforated Aluminium Panel (1988mm x 1188mm)
• 1 x Monument Framing Kit – provides a smooth, finished border
• 4 x Monument Post Brackets – ideal for direct post-to-post installation
• 50 x Monument Stainless Steel Screws – built for outdoor conditions

Key Features:

• Finished Panel Size: 2000mm (W) x 1200mm (H)
• Constructed from high-grade, powder-coated aluminium
• Low-maintenance, rust-resistant, and built for outdoor performance
• Fully compliant with Australian Standard AS1926.1 for pool safety
• Simple installation – perfect for DIY or professional projects
• Suitable for residential and commercial applications

Product ID: PP-PANEL-MN/PP-FRAMEKIT-MN/SS-BH4-MN/PP-SCREW-MN-50PK

Monument 2000x1200mm Perforated Pool Fence Panel Kit with Channel

Kit Includes:

• 1 x Monument Perforated Plain Aluminium Panel (1988mm x 1188mm)
• 1 x Monument Framing Kit – delivers a clean, enclosed finish
• 2 x Monument U Channels – for secure side-mount framing
• 50 x Monument Stainless Steel Screws – corrosion-resistant for long-term use

Key Features:

• Finished Panel Size: 2000mm (W) x 1200mm (H)
• Constructed from high-grade, powder-coated aluminium
• Low-maintenance, rust-resistant, and built for outdoor performance
• Fully compliant with Australian Standard AS1926.1 for pool safety
• Simple installation – perfect for DIY or professional projects
• Suitable for residential and commercial applications

Product ID: PP-PANEL-MN/PP-FRAMEKIT-MN/PP-U-MN-2PK/PP-SCREW-MN-50PK

Monument 2400mm In-Ground Aluminium Post

Product ID: XP-2400-FP-MN

Monument 2400mm In-Ground Aluminium Post with Dress Ring

Product ID: XP-2400-FP-MN/XP-DR-MN

Monument 2450x1200mm Aluminium Flat Top Pool Fence Panels

2450x1200mm Aluminium Flat Top Pool Fence Panel

• Colour: Monument
• Panel Size: 2450mm (W) × 1200mm (H)
• Pickets: 16mm (D) x 1.2mm (T) (alloy 6063-T6)
• Picket Spacing: 72.1mm gap with 88.1mm centre
• Rails: 38mmx25mmx1.6mm
• Material: Powder-coated aluminium – rust-resistant & weatherproof
• Design: Sleek flat top – modern and minimal
• Safety: Complies with Australian Pool Safety Standard AS1926.1
• Installation: Lightweight and easy to install – DIY-friendly
• Finish: Durable powder coat – low maintenance, no repainting
• Ideal For: Pool fencing, garden borders, pet-safe enclosures

Product ID: SS-FTP-2450-MN

Monument 4 Pack Horizontal Brackets for 38x25mm Rails

Product ID: SS-BH4-MN

Monument 975x1200mm Aluminium Flat Top Pool Fence Gate

975x1200mm Aluminium Flat Top Pool Fence Gate

• Colour: Monument
• Gate Size: 975mm (W) × 1200mm (H)
• Material: Powder-coated aluminium – rust-resistant & weatherproof
• Design: Sleek flat top – modern and minimal
• Safety: Complies with Australian Pool Safety Standard AS1926.1
• Installation: Lightweight and easy to install – DIY-friendly
• Finish: Durable powder coat – low maintenance, no repainting
• Ideal For: Pool fencing, garden borders, pet-safe enclosures

Note: You will need to order Hinges and a Latch for your gate separately.

Product ID: SS-FTG-0975-MN

Monument 975x1200mm Perforated Pool Fence Gate

• Dimensions: 975mm wide x 1200mm high
• Plain Perforated – Clean, minimalist look
• Colour Monument
• Made from high-quality, rust-resistant aluminium
• Fully compliant with Australian Pool Fencing Standard AS1926.1
• Ideal for pool areas, garden gates, and modern fencing projects
• Lightweight yet sturdy construction for long-lasting performance
• Low-maintenance – resists corrosion, warping, and fading
• Matches our perforated panel and hardware range for a seamless finish

Hinges and Latch sold separately.

Product ID: PP-GATE-MN

Monument Horizontal Swivel Bracket for 38x25mm Rails

Product ID: SS-BSWIV-HORIZ-MN

Monument Palm 2000x1200mm Perforated Pool Fence Panel Kit with Brackets

Kit Includes:

• 1 x Monument Palm Perforated Aluminium Panel (1988mm x 1188mm)
• 1 x Monument Framing Kit – provides a smooth, finished border
• 4 x Monument Post Brackets – ideal for direct post-to-post installation
• 50 x Monument Stainless Steel Screws – built for outdoor conditions

Key Features:

• Finished Panel Size: 2000mm (W) x 1200mm (H)
• Constructed from high-grade, powder-coated aluminium
• Low-maintenance, rust-resistant, and built for outdoor performance
• Fully compliant with Australian Standard AS1926.1 for pool safety
• Simple installation – perfect for DIY or professional projects
• Suitable for residential and commercial applications

Product ID: PP-PANEL-PALM-MN/PP-FRAMEKIT-MN/SS-BH4-MN/PP-SCREW-MN-50PK

Monument Palm 2000x1200mm Perforated Pool Fence Panel Kit with Channel

Kit Includes:

• 1 x Monument Perforated Palm Aluminium Panel (1988mm x 1188mm)
• 1 x Monument Framing Kit – delivers a clean, enclosed finish
• 2 x Monument U Channels – for secure side-mount framing
• 50 x Monument Stainless Steel Screws – corrosion-resistant for long-term use

Key Features:

• Finished Panel Size: 2000mm (W) x 1200mm (H)
• Constructed from high-grade, powder-coated aluminium
• Low-maintenance, rust-resistant, and built for outdoor performance
• Fully compliant with Australian Standard AS1926.1 for pool safety
• Simple installation – perfect for DIY or professional projects
• Suitable for residential and commercial applications

Product ID: PP-PANEL-PALM-MN/PP-FRAMEKIT-MN/PP-U-MN-2PK/PP-SCREW-MN-50PK

Monument Palm 975x1200mm Perforated Pool Fence Gate

• Dimensions: 975mm wide x 1200mm high
• Palm Perforated – Clean, minimalist look
• Colour Monument
• Made from high-quality, rust-resistant aluminium
• Fully compliant with Australian Pool Fencing Standard AS1926.1
• Ideal for pool areas, garden gates, and modern fencing projects
• Lightweight yet sturdy construction for long-lasting performance
• Low-maintenance – resists corrosion, warping, and fading
• Matches our perforated panel and hardware range for a seamless finish

Hinges and Latch sold separately.

Product ID: PP-GATE-PALM-MN

Monument Vertical Swivel Bracket for 38x25mm Rails

Product ID: SS-BSWIV-VERT-MN

Narrow Reeded Radius Corner Shower Screen Panel

Shower Screen Fixed Panel

• Ultraclear Narrow Reeded Glass
• 200mm Radius in Top Left or Right Corners
• 2050mm High
• 10mm Toughened Safety Glass with Polished Edges
• Available in 3 widths (897, 997 and 1197mm) - Select your width from the list

Click Here to View Size guide.

Note: You must either choose a Right or Left Panel depending on your shower screen layout. For ease of cleaning the narrow reed side must be installed on the outside of the shower.

Product ID: P-R-RAD-UCNR

Nickle Sliding Shower Installation Kit

Kit Includes:

• 2 x Door Upper Rollers
• 2 x Door Stabiliser Guides
• 2 x Fixed Panel Rail Connectors
• 2 x Stoppers
• 1 x Recessed Round Handle
• 1 x Floor Guide
• 2 x Rail Wall Brackets

Product ID: STAL-KIT-NIKL

Offset Wall Bracket - Brushed Brass / Gold - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Brushed Gold Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Product ID: P-ORO-WB-O

Offset Wall Bracket - Brushed Brass / Gold - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Brushed Gold Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Product ID: P-ORO-WB-O

Offset Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Chrome Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Product ID: P-WB-O

Offset Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Chrome Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Product ID: P-WB-O

Offset Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Wall Bracket
• Matt Black Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Product ID: PN-WB-O

Offset Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Wall Bracket
• Matt Black Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Product ID: PN-WB-O

Offset Wall Bracket for 35x35mm Aluminium Glass Top Rail

• Offset Wall Bracket
• 110mm W x 42mm H x 20mm D x 6mm T
• Rail fits inside the bracket cavity
• Internal cavity depth: 20mm
• 1 x 7mm Counter Sunk Fixing Hole
• Includes one pointed grub screw to secure bracket to rail

Available in:

• Stain - 316 Stainless Steel
• Matt Black
• Matt White

Product ID: SER35-WBEXT

Offset Wall to Glass Brushed Brass / Gold Shower Screen Door Hinge

2 required per door

• Brushed Brass / Gold Finish
• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Nickel
• Gunmetal Grey

Product ID: P-ORO-H-OP

Offset Wall to Glass Chrome Shower Screen Door Hinge

2 required per door

• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Matt Black
• Matt White
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Product ID: PB-H-OP

Offset Wall to Glass Matt Black Shower Screen Door Hinge

2 required per door

• Offset Wall to Glass Hinge
• Matt Black Finish
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt White
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Product ID: PN-H-OP

Polaris 125 Series Glass/Glass Hinges

The Polaris Soft Close Hinge is a state-of-the-art product unrivaled in design, style and safety

The Polaris soft close hinge is the safest and most reliable specially designed pool fence hinge in the industry that complies with the stringent Australian Standards AS1926 and AS 2820.

• New and improved 125 series hinge is now made with duplex SS2205 stainless steel
• Improved design features including commercial rated adjustable tension spring (tempered SS304) with multiple spring closing settings (soft, medium & strong) and the highest quality
• European made dampeners for smooth, soft close action
• Self closing hinge suitable for 10mm and 12mm thick glass gates
• Revolutionary anti-drop gate packing system significantly lowers the chance of gates dropping or sagging over time
• Easy installation process – install guide included in each box
• Available in polish, satin, matt black and matt white finishes

Click Here to View an installation video of these hinges

Product ID: PSC-125GG

Polaris 125 Series Glass/Wall Hinges

The Polaris Soft Close Hinge is a state-of-the-art product unrivaled in design, style and safety

The Polaris soft close hinge is the safest and most reliable specially designed pool fence hinge in the industry that complies with the stringent Australian Standards AS1926 and AS 2820.

• New and improved 125 series hinge is now made with duplex SS2205 stainless steel
• Improved design features including commercial rated adjustable tension spring (tempered SS304) with multiple spring closing settings (soft, medium & strong) and the highest quality
• European made dampeners for smooth, soft close action
• Self closing hinge suitable for 10mm and 12mm thick glass gates
• Revolutionary anti-drop gate packing system significantly lowers the chance of gates dropping or sagging over time
• Easy installation process – install guide included in each box
• Available in polish, satin, matt black and matt white finishes

Product ID: PSC-125W

Polaris S155 Series – Soft Close Glass-to-Glass Pool Fence Hinges

Turn your economy gate into a premium soft-close system!

Product Highlights:

• NEW & Innovative Design – Instantly upgrade standard or economy pool gates with a soft-close system.
• Retrofit-Friendly – Multiple hole spacings for easy replacement of existing hinges—no new drilling required. (See images for glass hole positions)
• Hydraulic Soft-Close Technology – Smooth, quiet, and controlled closing action for added safety and style.
• Glass-to-Glass Mounting – Perfect for 8–12mm toughened glass panels in frameless pool fencing.
• Heavy-Duty Performance – Supports gates up to 45kg and 1000mm wide.
• 316 Marine Grade Stainless Steel – Rust-resistant and ideal for coastal or saltwater pool environments.
• Fully Adjustable – Fine-tune gate tension and alignment with built-in tools for perfect operation.
• Stylish Finish Options – Choose from Polished Stainless, Matte Black, or Brushed Satin.
• Standards Compliant – Exceeds Australian Safety Standard AS1926.1-2012 for pool fencing.

What’s Included:

• 2 × Polaris S155 Soft Close Hinges
• 1 × Adjustment Tool Kit
• 1 × Installation Manual

Ideal For:

• Retrofitting existing pool gates with spring hinges
• Frameless glass pool fencing systems
• Residential & commercial installations
• Coastal, high-moisture, and saltwater environments

Product ID: PSC-S155-GG

Polaris S155 Series – Soft Close Glass-to-Round Post Pool Fence Hinges

Turn your economy gate into a premium soft-close system!

Product Highlights:

• NEW & Innovative Design – Instantly upgrade standard or economy pool gates with a soft-close system.
• Retrofit-Friendly – Multiple hole spacings for easy replacement of existing hinges—no new drilling required. (See images for glass hole positions)
• Hydraulic Soft-Close Technology – Smooth, quiet, and controlled closing action for added safety and style.
• Glass-to-Glass Mounting – Perfect for 8–12mm toughened glass panels in frameless pool fencing.
• Heavy-Duty Performance – Supports gates up to 45kg and 1000mm wide.
• 316 Marine Grade Stainless Steel – Rust-resistant and ideal for coastal or saltwater pool environments.
• Fully Adjustable – Fine-tune gate tension and alignment with built-in tools for perfect operation.
• Stylish Finish Options – Choose from Polished Stainless or Brushed Satin.
• Standards Compliant – Exceeds Australian Safety Standard AS1926.1-2012 for pool fencing.

What’s Included:

• 2 × Polaris S155 Soft Close Hinges
• 1 × Adjustment Tool Kit
• 1 × Installation Manual

Ideal For:

• Retrofitting existing pool gates with spring hinges
• Frameless glass pool fencing systems
• Residential & commercial installations
• Coastal, high-moisture, and saltwater environments

Product ID: PSC-S155-RP

Polaris S155 Series – Soft Close Glass-to-Wall Pool Fence Hinges

Turn your economy gate into a premium soft-close system!

Product Highlights:

• NEW & Innovative Design – Instantly upgrade standard or economy pool gates with a soft-close system.
• Retrofit-Friendly – Multiple hole spacings for easy replacement of existing hinges—no new drilling required. (See images for glass hole positions)
• Hydraulic Soft-Close Technology – Smooth, quiet, and controlled closing action for added safety and style.
• Glass-to-Glass Mounting – Perfect for 8–12mm toughened glass panels in frameless pool fencing.
• Heavy-Duty Performance – Supports gates up to 45kg and 1000mm wide.
• 316 Marine Grade Stainless Steel – Rust-resistant and ideal for coastal or saltwater pool environments.
• Fully Adjustable – Fine-tune gate tension and alignment with built-in tools for perfect operation.
• Stylish Finish Options – Choose from Polished Stainless, Matte Black, or Brushed Satin.
• Standards Compliant – Exceeds Australian Safety Standard AS1926.1-2012 for pool fencing.

What’s Included:

• 2 × Polaris S155 Soft Close Hinges
• 1 × Adjustment Tool Kit
• 1 × Installation Manual

Ideal For:

• Retrofitting existing pool gates with spring hinges
• Frameless glass pool fencing systems
• Residential & commercial installations
• Coastal, high-moisture, and saltwater environments

Product ID: PSC-S155-W

Polaris Soft Close Surface Mount Hinges

Product ID: PSC-FM156

Polished 10mm Spacer for Edge Mount Spigot

Product ID: MAD-FACEM-SO10-P

Polished 25x21mm 90 Degree Joiner for Glass Balustrade / Pool Fence Top Rail

• Polished Finish Stainless
• Joins 25x21mm Slotted Tube at a 90 degree angle (on a corner)
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Product ID: STG-2521-90J-P

Polished 25x21mm 90 Degree Vertical Joiner for Glass Balustrade / Pool Fence Top Rail

• Polished Stainless Steel
• Allows you to run the rail down the side of the glass edge
• 316 grade Stainless Steel
• Fit by epoxy glue

Product ID: STG-2521-VERTJ-P

Polished 25x21mm End Cap for Glass Balustrade / Pool Fence Top Rail

• Polished Finish Stainless
• End Cap / Stop End
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Product ID: STG-2521-EC-P

Polished 25x21mm Extended Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Polished Finish Stainless
• Extended Wall Plate for use with Face Mount Glass Balustrade
• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Product ID: STG-2521-WPEXT-P

Polished 25x21mm Horizontal Adjustable Joiner for Glass Balustrade / Pool Fence Top Rail

• Polished Finish Stainless
• Joins 25x21mm Slotted Tube at a Corner that is not 90 degrees
• Bends up to 45 Degrees in both directions
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Product ID: STG-2521-HJA-P

Polished 25x21mm In-Line Joiner for Glass Balustrade / Pool Fence Top Rail

• Polished Finish Stainless
• Joins 2 straight lengths of 25x21mm Slotted Stainless Steel Tube
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Product ID: STG-2521-J-P

Polished 25x21mm Vertical Adjustable Joiner for Glass Balustrade / Pool Fence Top Rail

• Polished Finish Stainless
• Joins 25x21mm Slotted Tube at a change of Vertical Joiner (eg. Down Stairs)
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Product ID: STG-2521-VJA-P

Polished 25x21mm Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Polished Finish Stainless
• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Product ID: STG-2521-WP-P

Polished 3mm Packers for Edge Mount Spigot

Product ID: MAD-FACEM-3PKR-P

Polished Chrome 90° Bracket for Sliding Shower Screen

Required when installing a sliding shower door with a glass return panel.

Product ID: STAL-90J

Polished Chrome Slimline Rail Wall Bracket

Polished Chrome Finish

Only required if using a 650mm modular Fixed Glass Panel

Product ID: STAL-RWBS

Polished Face Mount Spigot with Tilt Adjustment and M12 Concrete Installation Kit

• Duplex Stainless Steel 2205
• Face mount spigot – fix to vertical surface of concrete, timber/steel beams or bearers
• 2 part spigot for easy install: (1) rear plate fixed to vertical surface (2) spigot attaches to rear plate with 2 x M8 counter sunk screws
• Tilt Adjustable – innovative design allows for tilt adjustment by simply turning top & bottom M8 grub screws
• Glass alignment adjustability is a huge installation advantage
• Timber/beam fixing – 2 x fixing points in the rear plate for increased strength
• Concrete fixing – ideal for narrow slabs with 1 x sturdy M18 fixing
• Neat finish – slide in cover plate hides exposed screws on spigot front
• Earthing terminal included
• 3mm stackable horseshoe packers sold separately that can be inserted behind rear plate to overcome uneven vertical surfaces

Click Here to View Spigot Brochure

Click Here to View Installation Instructions

Product ID: MAD-TILT-S-P/MAD-TILT-M12-BALKIT

Polished Face Mount Spigot with Tilt Adjustment and M12 Timber Installation Kit

• Duplex Stainless Steel 2205
• Face mount spigot – fix to vertical surface of concrete, timber/steel beams or bearers
• 2 part spigot for easy install: (1) rear plate fixed to vertical surface (2) spigot attaches to rear plate with 2 x M8 counter sunk screws
• Tilt Adjustable – innovative design allows for tilt adjustment by simply turning top & bottom M8 grub screws
• Glass alignment adjustability is a huge installation advantage
• Timber/beam fixing – 2 x fixing points in the rear plate for increased strength
• Concrete fixing – ideal for narrow slabs with 1 x sturdy M18 fixing
• Neat finish – slide in cover plate hides exposed screws on spigot front
• Earthing terminal included
• 3mm stackable horseshoe packers sold separately that can be inserted behind rear plate to overcome uneven vertical surfaces

Click Here to View Spigot Brochure

Click Here to View Installation Instructions

Product ID: MAD-TILT-S-P/MAD-TILT-M12KIT

Polished Face Mount Spigot with Tilt Adjustment and M18 Concrete Installation Kit

• Duplex Stainless Steel 2205
• Face mount spigot – fix to vertical surface of concrete, timber/steel beams or bearers
• 2 part spigot for easy install: (1) rear plate fixed to vertical surface (2) spigot attaches to rear plate with 2 x M8 counter sunk screws
• Tilt Adjustable – innovative design allows for tilt adjustment by simply turning top & bottom M8 grub screws
• Glass alignment adjustability is a huge installation advantage
• Timber/beam fixing – 2 x fixing points in the rear plate for increased strength
• Concrete fixing – ideal for narrow slabs with 1 x sturdy M18 fixing
• Neat finish – slide in cover plate hides exposed screws on spigot front
• Earthing terminal included
• 3mm stackable horseshoe packers sold separately that can be inserted behind rear plate to overcome uneven vertical surfaces

Click Here to View Spigot Brochure

Click Here to View Installation Instructions

Product ID: MAD-TILT-S-P/MAD-TILT-M18KIT