0 item:
 x 

Your shopping cart is empty!

Search Product

Guided Ordering

Direct Ordering

Glass Fence Gate Hardware

Glass Gate Latches and Hinges

You will need to use 1 latch and 1 hinge set for each gate you are installing in your pool fence. It is important that you select the correct hinge for your pool fence layout. You will need to know from where the gate will be hinged (swinging off) and latched (closed against).

Click Here to View our Glass Gate Layout Guide

Latch options include:

Note: For most of our latches only the glass gate will require pre-drilled holes. When the non-gate side is also attaching to glass it is friction fixed with 2 grub screws.

Hinge Options include:

Note: When using glass to glass both the hinge panel and gate panel will require holes.

You will also need to make sure you order the correct gate panel and hinge panel (if necessary).

Results 1 - 10 of 10

Glass to Glass in Straight Line Economy Pool Fence Gate Latch

$107.65
  • Glass to Glass Latch - Straight Line
  • Use for Glass Pool Fence Gate or Glass Balustrade Gate
  • Backing Plates are 316 Stainless Steel
  • Economy Latch is Black Polymer
  • Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
  • Latch Panel must be 12mm - No holes required
  • Suits 8, 10 and 12mm gates
  • For best results leave a 9mm gap between the gate and latch panel
Glass to Glass Gate Latch
Finish
Finish of Product

Glass to Glass in Straight Line Deluxe Pool Fence Gate Latch

$153.85
  • Glass to Glass Latch - Straight Line
  • Use for Glass Pool Fence Gate or Glass Balustrade Gate
  • Both Backing plates and latch are 316 Stainless Steel
  • Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
  • Latch Panel must be 12mm - No holes required
  • Suits 8, 10 and 12mm gates
  • For best results leave a 9mm gap between the gate and latch panel

Glass to Glass Gate Latch
Finish
Finish of Product

Glass to Wall/Square Post Economy Pool Fence Gate Latch

$90.85
  • Glass to Wall/Square Post
  • Use for Glass Pool Fence Gate or Glass Balustrade Gate
  • Backing Plates are 316 Stainless Steel
  • Latch is Black Polymer
  • Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
  • Suits 8, 10 and 12mm gates
  • For best results leave a 9mm gap between the gate and Post/Wall

Glass to Square Post Gate Latch

Finish
Finish of Product

Glass to Wall/Square Post Deluxe Pool Fence Gate Latch

$153.85
  • Glass to Wall/Square Post
  • Use for Glass Pool Fence Gate or Glass Balustrade Gate
  • Backing Plates are 316 Stainless Steel
  • Deluxe Latch in 316 Stainless Steel
  • Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
  • Suits 8, 10 and 12mm gates
  • For best results leave a 9mm gap between the gate and Post/Wall

Glass to Glass Gate Latch
Finish
Finish of Product

Glass to Glass 90 Degree Internal Angle Pool Fence Gate Latch

$119.95
  • Glass to Glass at a 90 Degree Internal Angle Latch
  • Use for Glass Pool Fence Gate or Glass Balustrade Gate
  • Backing Plates are 316 Stainless Steel
  • Latch is Black Polymer
  • Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
  • Latch Panel must be 12mm - No holes required
  • Suits 8, 10 and 12mm gates
  • For best results leave a 9mm gap between the gate and latch panel

Glass to Glass Internal Corner Latch
Finish
Finish of Product

Glass to Glass 90 Degree External Angle Pool Fence Gate Latch

$119.95
  • Glass to Glass at a 90 Degree External Angle Latch
  • Use for Glass Pool Fence Gate or Glass Balustrade Gate
  • Backing Plates are 316 Stainless Steel
  • Latch is Black Polymer
  • Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
  • Latch Panel must be 12mm - No holes required
  • Suits 8, 10 and 12mm gates
  • For best results leave a 9mm gap between the gate and latch panel

Glass to Glass External Gate Latch
Finish
Finish of Product

Glass to Round Post Deluxe Gate Pool Fence Latch

$137.05
  • Glass to Round Post Deluxe Latch
  • Use for Glass Pool Fence Gate or Glass Balustrade Gate
  • Backing Plates are 316 Stainless Steel
  • Latch is 316 Stainless Steel
  • Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
  • Suits 8, 10 and 12mm gates
  • For best results leave a 9mm gap between the gate and Post/Wall

Finish
Finish of Product

Glass to Glass Pool Fence Gate Hinge Set

$152.45
  • Glass to Glass Gate Hinge
  • Use for Glass Pool Fence Gate or Glass Balustrade Gate
  • Suits 8 & 10mm Glass Gates
  • Suits 12mm Hinge Panel
  • 316 Grade Stainless
  • Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side, 66mm from top and bottom and 47 apart)
  • Hinge panel needs to be drilled 4 x 14mm Holes (40mm in from the side, 60mm from the top and bottom and 60mm apart)
  • For best results allow for a 10mm gap between the hinge panel and gate

Finish
Finish of Product

Glass to Wall/Square Post Pool Fence Hinge Set

$70.70
  • Glass to Wall/Square Post
  • Use for Glass Pool Fence or Glass Balustrade Gate
  • Suits 8 & 10mm Glass Gates
  • 316 Grade Stainless
  • Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side, 66mm from top and bottom and 47 apart)
  • You will need to allow for a gap of 26mm between the gate and post

Glass Gate to Wall Hinges

Finish
Finish of Product

Glass to Round Post Pool Fence Hinge Set

$76.85
  • Glass to Round Post Hinge Set
  • Use for Glass Pool Fence or Glass Balustrade Gate
  • Suits 8 & 10mm Glass Gates
  • 316 Grade Stainless
  • Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side, 66mm from top and bottom and 47 apart)
  • You will need to allow for a gap of 20mm between the gate and post

Finish
Finish of Product
  • Phone: 0414266624
  • Email: This email address is being protected from spambots. You need JavaScript enabled to view it.