1700 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1700mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 61kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Black Glass to Wall/Square Post Pool Fence Hinge Set

• Glass to Wall/Square Post
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 22mm between the gate and post

25x21mm 90 Degree Vertical Joiner for Glass Balustrade / Pool Fence Top Rail

• 316 grade Stainless Steel
• Allows you to run the rail down the side of the glass edge
• 316 grade Stainless Steel
• Fit by epoxy glue

Wall Bracket - Brushed Brass / Gold - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Brushed Brass / Gold Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

This product is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Nickel
• Gunmetal Grey

Offset Wall Bracket - Brushed Brass / Gold - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Brushed Gold Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

135 Degree Glass to Glass Brushed Brass / Gold Shower Screen Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Brushed Brass / Gold Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass 135 degree shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Nickel
• Gunmetal Grey

Offset Wall to Glass Brushed Brass / Gold Shower Screen Door Hinge

2 required per door

• Brushed Brass / Gold Finish
• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Nickel
• Gunmetal Grey

Wall to Glass Brushed Brass / Gold Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Brushed Brass / Gold Finish
• 4 x Fixing Holes
• Allow 9mm gap between Wall and Glass
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Nickel
• Gunmetal Grey

Glass to Glass Brushed Brass / Gold Shower Screen Door Hinge

2 required per door

• Glass to Glass Hinge
• Brushed Brass / Gold Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Nickel
• Gunmetal Grey

19mm Wide 2100mm Long Brushed Brass / Gold Shower Screen Aluminium U Channel

• 19mm Slimline Anodised Aluminium Channel
• Adds 8mm to the overall glass width
• Brushed Brass / Gold Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

35mm Deep 2100mm Long Brushed Brass / Gold Shower Screen Aluminium U Channel

• 35mm Deep Anodised Aluminium Channel
• Adds 10mm to 25mm to the overall glass width
• Brushed Gold Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 15mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Glass to Wall Adjustable Horizontal Support Arm - Brushed Brass / Gold - For Shower Screen

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Glass to Back Wall Brace Bracket - Brushed Brass / Gold - For Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

This shower screen support arm is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Nickel
• Gunmetal Grey

Round Slimline Brushed Brass / Gold Shower Screen Door Knob

• Round Knob for Glass Shower Screen Door
• Brushed Brass / Gold Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This round glass shower screen door knob is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Nickel
• Gunmetal Grey

Matt White Round Glass Shower Screen Door Knob

• Round Knob for Glass Shower Screen Door
• Matt White Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This round glass shower screen door knob is also available in:

• Polished Chrome
• Matt Black
• Brushed Brass/Gold
• Brushed Nickel
• Gunmetal Grey

Matt White Glass to Back Wall Brace Bracket

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

This shower screen support arm is also available in:

• Polished Chrome
• Matt Black
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Matt White Glass to Wall Adjustable Horizontal Glass Shower Screen Support Arm

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Matt White 35mm Deep 2100mm Long Shower Screen Wall Channel

• 35mm Deep Aluminium Channel
• Adds 10mm to 25mm to the overall glass width
• Matt White Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 15mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Matt White 19mm Deep 2100mm Long Shower Screen Wall Channel

• 19mm Slimline Aluminium Channel
• Adds 8mm to the overall glass width
• Matt White Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Matt White Glass to Glass Shower Screen Door Hinge

2 required per door

• Glass to Glass Hinge
• Matt White Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Matt White Wall to Glass Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Matt White Finish
• 4 x Fixing Holes
• Allow 9mm gap between Wall and Glass
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Matt White Glass Shower Screen Offset Wall to Glass Door Hinge

2 required per door

• Matt White Finish
• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Matt White Glass Shower Screen 135 Degree Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Matt White Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass 135 degree shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Matt White Glass Shower Screen Offset Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Matt White Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Matt White Glass Shower Screen Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Matt White Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

This product is also available in:

• Polished Chrome
• Matt Black
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Gunmetal Grey Glass Shower Screen Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Gunmetal Grey Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

This product is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Nickel
• Brushed Brass/Gold

Gunmetal Grey Glass Shower Screen Offset Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Gunmetal Grey Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Gunmetal Grey Glass Shower Screen 135 Degree Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Gunmetal Grey Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass 135 degree shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Nickel
• Brushed Brass/Gold

Gunmetal Grey Glass Shower Screen Offset Wall to Glass Door Hinge

2 required per door

• Gunmetal Grey Finish
• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Nickel
• Brushed Brass/Gold

Gunmetal Grey Wall to Glass Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Gunmetal Grey Finish
• 4 x Fixing Holes
• Allow 9mm gap between Wall and Glass
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Nickel
• Brushed Brass/Gold

Gunmetal Grey Glass to Glass Shower Screen Door Hinge

2 required per door

• Glass to Glass Hinge
• Gunmetal Grey Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Nickel
• Brushed Brass/Gold

Gunmetal Grey Glass to Wall Adjustable Horizontal Glass Shower Screen Support Arm

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Gunmetal Grey Glass to Back Wall Brace Bracket

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

This shower screen support arm is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Nickel
• Brushed Brass/Gold

Gunmetal Grey Round Glass Shower Screen Door Knob

• Round Knob for Glass Shower Screen Door
• Gunmetal Grey Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This round glass shower screen door knob is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Brass/Gold
• Brushed Nickel

Brushed Nickel Glass Shower Screen Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Brushed Nickel Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

This product is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Brass/Gold
• Gunmetal Grey

Brushed Nickel Glass Shower Screen Offset Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Brushed Nickel Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Brushed Nickel Glass Shower Screen 135 Degree Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Brushed Nickel Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass 135 degree shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Brass/Gold
• Gunmetal Grey

Brushed Nickel Glass Shower Screen Offset Wall to Glass Door Hinge

2 required per door

• Brushed Nickel Finish
• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Brass/Gold
• Gunmetal Grey

Brushed Nickel Wall to Glass Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Brushed Nickel Finish
• 4 x Fixing Holes
• Allow 9mm gap between Wall and Glass
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Brass/Gold
• Gunmetal Grey

Brushed Nickel Glass to Glass Shower Screen Door Hinge

2 required per door

• Glass to Glass Hinge
• Brushed Nickel Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Brass/Gold
• Gunmetal Grey

Brushed Nickel 19mm Deep 2100mm Long Shower Screen Wall Channel

• 19mm Slimline Aluminium Channel
• Adds 8mm to the overall glass width
• Matt White Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Brushed Nickel 35mm Deep 2100mm Long Shower Screen Wall Channel

• 35mm Deep Aluminium Channel
• Adds 10mm to 25mm to the overall glass width
• Brushed Nickel Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 15mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Brushed Nickel Glass to Wall Adjustable Horizontal Glass Shower Screen Support Arm

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Brushed Nickel Glass to Back Wall Brace Bracket

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

This shower screen support arm is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Brass/Gold
• Gunmetal Grey

Brushed Nickel Round Glass Shower Screen Door Knob

• Round Knob for Glass Shower Screen Door
• Brushed Nickel Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This round glass shower screen door knob is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Brass/Gold
• Gunmetal Grey

Square Adjustable Glass to Wall Chrome Horizontal Support Arm - For Glass Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Wall to Glass support arm
• Chrome Finish
• Width Adjustable up to 1200mm - Simply cut the tube to the required width
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

This glass shower screen support brace is also available in:

• Matt Black

300x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 300mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 11kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

400x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 400mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 15kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

350x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 350mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 13kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

1400x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1400mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 53kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

1350x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1350mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 51kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

1300x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1300mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 49kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

1250x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1250mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 47kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

1200x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1200mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 45kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

1150x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1150mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 43kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

1100x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1100mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 41kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

1050x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1050mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 39kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

1000x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 1000mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 38kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

950x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 950mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 36kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

900x100x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 900mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 34kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel