1226x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 1226mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 3.7kg
• Overall install width: 1230mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Product ID: P-B-1226

1236x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 1236mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 3.7kg
• Overall install width: 1240mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Product ID: P-B-1236

Round Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Round Wall Bracket
• 2.5mm Gap between glass and wall
• Chrome Plated Finish
• Slimline half round profile
• Suitable for 8mm & 10mm Glass
• 1 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Product ID: P-WB-RND

Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Chrome Plated Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

This product is also available in:

• Matt Black
• Matt White
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Product ID: P-WB

Offset Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Chrome Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Product ID: P-WB-O

Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Matt Black Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

This product is also available in:

• Polished Chrome
• Matt White
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Product ID: PN-WB

Offset Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Wall Bracket
• Matt Black Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Product ID: PN-WB-O

Polaris 125 Series Glass/Glass Hinges

The Polaris Soft Close Hinge is a state-of-the-art product unrivaled in design, style and safety

The Polaris soft close hinge is the safest and most reliable specially designed pool fence hinge in the industry that complies with the stringent Australian Standards AS1926 and AS 2820.

• New and improved 125 series hinge is now made with duplex SS2205 stainless steel
• Improved design features including commercial rated adjustable tension spring (tempered SS304) with multiple spring closing settings (soft, medium & strong) and the highest quality
• European made dampeners for smooth, soft close action
• Self closing hinge suitable for 10mm and 12mm thick glass gates
• Revolutionary anti-drop gate packing system significantly lowers the chance of gates dropping or sagging over time
• Easy installation process – install guide included in each box
• Available in polish, satin, matt black and matt white finishes

Click Here to View an installation video of these hinges

Product ID: PSC-125GG

Small Glass Brace Bracket - Chrome Plated - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Product ID: P-GBB-S

Large Glass Brace Bracket - Chrome Plated - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Product ID: P-GBB-L

Small Glass Brace Bracket - Matt Black - For Glass Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Matt Black Finish
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Product ID: PN-GBB-S

Large Glass Brace Bracket - Matt Black - For Glass Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Matt Black Finish
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Product ID: PN-GBB-L

Glass to Wall/Post Spring Hinge

• Glass to Wall/Square Post
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 22mm between the gate and post

Product ID: MR-SPH

Small Glass Brace Bracket - Brushed Brass / Gold - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Product ID: P-ORO-GBB-S

Large Glass Brace Bracket - Brushed Brass / Gold - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Product ID: P-ORO-GBB-L

Matt White Small Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Product ID: P-SNO-GBB-S

Matt White Large Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Product ID: P-SNO-GBB-L

Gunmetal Grey Large Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Product ID: P-GIO-GBB-L

Gunmetal Grey Small Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Product ID: P-GIO-GBB-S

Brushed Nickel Large Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Product ID: P-NIKL-GBB-L

Brushed Nickel Small Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Product ID: P-NIKL-GBB-S

Polaris 125 Series Glass/Wall Hinges

The Polaris Soft Close Hinge is a state-of-the-art product unrivaled in design, style and safety

The Polaris soft close hinge is the safest and most reliable specially designed pool fence hinge in the industry that complies with the stringent Australian Standards AS1926 and AS 2820.

• New and improved 125 series hinge is now made with duplex SS2205 stainless steel
• Improved design features including commercial rated adjustable tension spring (tempered SS304) with multiple spring closing settings (soft, medium & strong) and the highest quality
• European made dampeners for smooth, soft close action
• Self closing hinge suitable for 10mm and 12mm thick glass gates
• Revolutionary anti-drop gate packing system significantly lowers the chance of gates dropping or sagging over time
• Easy installation process – install guide included in each box
• Available in polish, satin, matt black and matt white finishes

Product ID: PSC-125W