800 x 1200 x 12mm Economy Spring Hinge Panels

Glass Gate Spring Hinge Panel. Used to swing a glass gate off.

• Width: 800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 29kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Install with Economy Glass Gate Panel and either glass to glass spring hinges or Polaris 155 series hinges.

Glass is certified to Australian Standards

Product ID: 12NH-0800

800 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 29kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Note: This panel will need to be secured to a post or another glass panel using Glass Braces or Glass Clamps. It will not hole a gate if only supported by Spigots.

Product ID: 12NH-0800

800 x 1200 x 12mm Glass to Wall/Post Soft Close Gate Panel

• 800mm wide x 1200mm high frameless gate
• 12mm Grade A toughened safety glass
• Glass-to-wall design for a clean, modern finish
• Soft close hinges (sold separately) for smooth, quiet closing
• Polished, high-quality glass edges
• Complies with Australian Pool Fencing Standard AS1926.1
• Ideal for pool fencing and outdoor areas
• Easy to install with soft close hinges and latch (not included)

Product ID: 12PWG-0800

800 x 1200 x 12mm Glass/Glass Soft Close Gate Panel

• 800mm wide x 1200mm high frameless gate
• 12mm Grade A toughened safety glass
• Glass-to-Glass layout
• Soft close hinges (sold separately) for smooth, quiet closing
• Polished, high-quality glass edges
• Complies with Australian Pool Fencing Standard AS1926.1
• Ideal for pool fencing and outdoor areas
• Easy to install with soft close hinges and latch (not included)

Product ID: 12PGG-0800

800 x 1200mm Premium Soft Close Hinge Panels

Premium Soft Close Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 29kg
• Cutouts: 2 x Cutouts to suit premium soft close hinges

Glass is certified to Australian Standards

Note: This panel will need to be secured to a post or another glass panel using Glass Braces or Glass Clamps. It will not hole a gate if only supported by Spigots.

Product ID: 12NPH-0800

800mm Sliding Shower Screen Door Panel

• Width:800mm
• Height:2038mm
• Thickness:10mm
• Weight: 41kg

A Sliding Door Fixed panel and Sliding door fitting kit will be required to fit this panel.

Click Here for easy ordering of a full sliding door shower screen kit.

Product ID: STAL-D-0800

800x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 800mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 30kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

Product ID: 1000FBG-0800

800x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 29kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

Product ID: 12N-0800

800x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 800mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

Product ID: 1280S-0800

800x1350x12mm Toughened Glass Pool Fence Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 800mm
• Height: 1350mm
• Thickness: 12mm
• Weight: 32kg

Suitable for installation with:

• Top Mount Friction Spigots
• Face Mount Friction Spigots
• Posts
• Deck Mount Channel
• Face Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Product ID: 12CG-0800

800x970x12mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 800mm
• Height: 970mm
• Thickness: 12mm
• Weight: 23kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel
• Side Fix glass clamps

Glass is certified to AS1288:2006 Australian Standards

Product ID: 970NTG-0800

830x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 830mm
• Height: 850mm
• Thickness: 10mm
• Weight: 18kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

Product ID: 850BGH-0830

834 x 1200 x 8mm Glass Pool Fence Gate Panel

Glass Gate Panel.

• Width: 834mm
• Height: 1200mm
• Thickness: 8mm
• Weight: 20kg
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Product ID: 08SLG-0834

834 x 1200 x 8mm Spring Gate Panel

Economy Spring Hinge Glass Pool Fence Gate Panel

• 4 Widths available (750mm, 834mm, 890mm and 1000mm)
• Height: 1200mm
• Thickness: 8mm
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Install with Spring Hinges or Polaris 155 Series Soft Close Hinges

Product ID: 08SLG-0834

846x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 846mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.5kg
• Overall Finished Width: 850mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Product ID: P-B-0846

847(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Product ID: P-R-0847

850mm Sliding Shower Screen Fixed Panel

• Width: 850mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 44kg

A Sliding Door Panel and Sliding door fitting kit will be required to fit this panel.

Click Here for easy ordering of a full sliding door shower screen kit.

Product ID: STAL-F-0850

850x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 850mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 32kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

Product ID: 1000FBG-0850

850x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 850mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 31kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

Product ID: 12N-0850

850x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 850mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

Product ID: 1280S-0850

850x1500 x 6mm Bath Pivoting Shower Screen

Pivoting Bath Top Shower Screen

• 6mm clear toughened glass includes stylish rounded top corner
• Aluminium pivot against wall allows 25mm width adjustment
  (from 850mm to 875mm)
• Innovative design feature enables easy adjustment for out of square walls
• Left or right handing to suit bath
• Inwards and outwards swinging
• Includes drip seal to bath
• Complete kit in a box

Product ID: TSB-0850-P

850x970x12mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 850mm
• Height: 970mm
• Thickness: 12mm
• Weight: 25kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel
• Side Fix glass clamps

Glass is certified to AS1288:2006 Australian Standards

Product ID: 970NTG-0850

856x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 856mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.6kg
• Overall install width: 860mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Product ID: P-B-0856

866x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 866mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.6kg
• Overall install width: 870mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Product ID: P-B-0866

872(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Product ID: P-R-0872

876x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 876mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.6kg
• Overall install width: 880mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Product ID: P-B-0876

880x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 880mm
• Height: 850mm
• Thickness: 10mm
• Weight: 19kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

Product ID: 850BGH-0880

886x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 886mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.7kg
• Overall install width: 890mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Product ID: P-B-0886

890 x 1200 x 8mm Glass Pool Fence Gate Panel

Glass Gate Panel.

• Width: 890mm
• Height: 1200mm
• Thickness: 8mm
• Weight: 21kg
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Product ID: 08SLG-0890

890 x 1200 x 8mm Spring Gate Panel

Economy Spring Hinge Glass Pool Fence Gate Panel

• 4 Widths available (750mm, 834mm, 890mm and 1000mm)
• Height: 1200mm
• Thickness: 8mm
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Install with Spring Hinges or Polaris 155 Series Soft Close Hinges

Product ID: 08SLG-0890

896x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 896mm •Depth: 150mm •Thickness: 8mm •Weight: 2.7kg •Use With Hinge Panel: 279mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Product ID: P-B-0896

896x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 896mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.7kg
• Overall install width: 900mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Product ID: P-B-0896

897(w)x2050(h)x10mm Glass Shower Screen Panel with 200mm Radius Top Corner

• Corner: 200mm Radius
• Width: 897mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 46kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 900mm when installing with a wall bracket
• 907-910mm when installing with 19mm U Channel
• 907-922mm when installing with 35mm U Channel

You will also need to select your installation hardware by clicking here.

Product ID: P-R-RAD-0897

897(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Product ID: P-R-0897

897mm Sliding Shower Screen Return Panel

• Width: 897mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 46kg

A Sliding Door, Fixed Panel and Sliding Door Installation kit will be required to install this panel.

Product ID: STAL-R-0897

897mm x 2050mm Narrow Reed Radius to Left Corner

• Corner: 200mm Radius in Left Hand Corner
• Width: 897mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 46kg

Installation Widths:

• 900mm when installing with a wall bracket
• 907-910mm when installing with 19mm U Channel
• 907-922mm when installing with 35mm U Channel

You will also need to select your installation hardware by clicking here.

Product ID: P-R-RAD-UCNR-0897-L

897mm x 2050mm Narrow Reed Radius to Right Corner

• Corner: 200mm Radius in Right Hand Corner
• Width: 897mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 46kg
• Allow a 3mm Gap between the wall and glass and a 3mm Gap between this panel and the door.

Installation Widths:

• 900mm when installing with a wall bracket
• 907-910mm when installing with 19mm U Channel
• 907-922mm when installing with 35mm U Channel

You will also need to select your installation hardware by clicking here.

Product ID: P-R-RAD-UCNR-0897-R

90 Degree Glass to Glass Chrome Shower Screen Door Hinge

2 required per door

• Door is Closed in a 90 Degree Angle to the hinge panel
• Glass to Glass Hinge
• Chrome Plated Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

Product ID: ZUR-H-90

90 Degree Joiner for 35x35mm Aluminium Glass Top Rail

• 35x35mm 90 Degree Joiner
• Use when 2 lengths of rail join at a 90 degree corner
• Made from structural alloy 6061-T6
• Fits into Internal Cavity of Rail
• 4 x Pointed Grub Screws pre-installed to aid in securing join of rails
• Fitting is not visible once installed so does not need to colour match to the rail

Note: Rail must be neatly cut on a 45 degree mitre. A aluminium cutting blade on a drop saw will give best results

Product ID: SER35-J90-SA

90° Bracket for Sliding Shower Screen

Required when installing a sliding shower door with a glass return panel.

Product ID: STAL-90J

900 x 1200 x 12mm Glass to Wall/Post Soft Close Gate Panel

• 900mm wide x 1200mm high frameless gate
• 12mm Grade A toughened safety glass
• Glass-to-wall design for a clean, modern finish
• Soft close hinges (sold separately) for smooth, quiet closing
• Polished, high-quality glass edges
• Complies with Australian Pool Fencing Standard AS1926.1
• Ideal for pool fencing and outdoor areas
• Easy to install with soft close hinges and latch (not included)

Product ID: 12PWG-0900

900 x 1200 x 12mm Glass/Glass Soft Close Gate Panel

• 900mm wide x 1200mm high frameless gate
• 12mm Grade A toughened safety glass
• Glass-to-Glass layout
• Soft close hinges (sold separately) for smooth, quiet closing
• Polished, high-quality glass edges
• Complies with Australian Pool Fencing Standard AS1926.1
• Ideal for pool fencing and outdoor areas
• Easy to install with soft close hinges and latch (not included)

Product ID: 12PGG-0900

900mm Sliding Shower Screen Door Panel

• Width:900mm
• Height:2038mm
• Thickness:10mm
• Weight: 46kg

A Sliding Door Fixed panel and Sliding door fitting kit will be required to fit this panel.

Product ID: STAL-D-0900

900x100x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 900mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 34kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

Product ID: 1000FBG-0900

900x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 900mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 32kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

Product ID: 12N-0900

900x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 900mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

Product ID: 1280S-0900

900x1350x12mm Toughened Glass Pool Fence Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 900mm
• Height: 1350mm
• Thickness: 12mm
• Weight: 37kg

Suitable for installation with:

• Top Mount Friction Spigots
• Face Mount Friction Spigots
• Posts
• Deck Mount Channel
• Face Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Product ID: 12CG-0900

900x970x 12mm Soft Close Gate Panel

Balustrade Glass Gate Panel.

• Width: 900mm
• Height: 970mm
• Thickness: 12mm
• Weight: 18kg
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Requires 1 x Soft Close Hinge Set and 1 x Latch for installation.

Used for:

• Glass Balustrading

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Product ID: 970PWG-0900

900x970x 8mm Gate Panel

Balustrade Glass Gate Panel.

• Width: 900mm
• Height: 970mm
• Thickness: 8mm
• Weight: 18kg
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Requires 1 x Spring Hinge Set and 1 x Latch for installation.

Used for:

• Glass Balustrading

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Product ID: 970SLG-0900

900x970x12mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 900mm
• Height: 970mm
• Thickness: 12mm
• Weight: 26kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel
• Side Fix glass clamps

Glass is certified to AS1288:2006 Australian Standards

Product ID: 970NTG-0900

906x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 906mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.7kg
• Overall install width: 910mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Product ID: P-B-0906

916x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 916mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.7kg
• Overall install width: 920mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Product ID: P-B-0916

922(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Product ID: P-R-0922

926x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 926mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.8kg
• Overall install width: 930mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Product ID: P-B-0926

930x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 930mm
• Height: 850mm
• Thickness: 10mm
• Weight: 20kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

Product ID: 850BGH-0930

936x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 936mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.8kg
• Overall install width: 940mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Product ID: P-B-0936

946x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door.

• Width: 946mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.8kg
• Overall Finished Width: 950mm

Requires 2 x Glass Brace Brackets  and 1 x Wall Bracket for Installation.

Product ID: P-B-0946

947(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Product ID: P-R-0947

950mm Sliding Shower Screen Fixed Panel

• Width: 950mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 49kg

A Sliding Door Panel and Sliding door fitting kit will be required to fit this panel.

Click Here for easy ordering of a full sliding door shower screen kit.

Product ID: STAL-F-0950

950x1000x15mm Toughened Glass Balustrade Panel with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 950mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 36kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

Product ID: 1000FBG-0950