10 Pack Alignment Pins for Versatilt Channel

M10 x 120mm Stainless Threaded Rod, Nuts and Washers x 4 pack

• 4 x M10x120mm Stainless Steel Threaded Rods
• 4 x M10 Nuts
• 4 x M10 Washers
• Ideal for use with Square and Round Base Plate Spigots into Masonry or Steel
• 1 pack required per spigot

926x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 926mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.8kg
• Overall install width: 930mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

25x21mm Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

650x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 650mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 23kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1000x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 1000mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

897(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Large Glass Brace Bracket - Chrome Plated - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Glass to Wall Adjustable Brace Bracket - Matt Black - For Glass Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Wall to Glass support arm
• Matt Black Finish
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required
• Made from Brass

This shower screen support arm is also available in:

• Polished Chrome
• Matt White
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

20 x 3mm Thick Glass Setting Blocks

• 3mm THICK x 10mm WIDE x 50mm LONG CLEAR SETTING BLOCKS
• Pack of 20
• Install under any Hinge or Fixed panel to prevent it from sitting directly onto the tiles
• These are clear so will remain under the glass once the silicon has been applied

Economy Spring Hinge Panels

Glass Gate Spring Hinge Panel. Used to swing a glass gate off.

• 11 Widths available (600mm, 800mm, 1000mm, 1100mm, 1200mm, 1300mm, 1400mm, 1500mm, 1600mm, 1700mm, 1800mm)
• Height: 1200mm
• Thickness: 12mm
• Holes: 4 x 14mm Holes to fix glass gate hinges

Install with Economy Glass Gate Panel and either glass to glass spring hinges or Polaris 155 series hinges.

Glass is certified to Australian Standards

White 50mm Diameter x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• White
• 50mm Diameter
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

Soudal- CA1400 Chemical Anchor 280ml

Soudal - Soudafix CA1400 (Vinylester) - 280ml Tube

High-Performance 2-Part Anchoring Resin for Heavy-Duty Fixings

The Soudafix CA1400 is a premium-grade, two-component vinylester anchoring resin designed for secure and long-lasting fixings in solid and hollow masonry. Packaged in a convenient 280ml tube, this resin is ideal for structural applications requiring high load-bearing strength.

Engineered for professional use, it's perfect for fixing threaded rods into concrete, brick, or stone—making it an excellent solution for base plate installations and facemount spigot fittings.

Key Features:

• Fast-curing formula for reduced downtime
• Suitable for use in damp or water-filled holes
• High chemical resistance, making it suitable for aggressive environments
• No expansion pressure, reducing the risk of substrate cracking
• Can be used with standard silicone applicators (no special tools required)

Applications:

• Structural anchoring of threaded rods and rebar
• Mounting of base plates, facemount spigots, railings, and heavy-duty fixtures
• Suitable for use in concrete, masonry, and stone substrates

Choose Soudafix CA1400 for reliable, heavy-duty anchoring with superior performance and ease of use.

936x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 936mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.8kg
• Overall install width: 940mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Black 1400(h)x1450(w)mm Raked Aluminium Flat Top Pool Fence Panel

• Panel Size: 1400mm (H) × 1450mm (W)
• Pickets: 16mm (D) x 1.2mm (T) (alloy 6063-T6)
• Picket Spacing: 72.1mm gap with 88.1mm centre
• Rails: 38mmx25mmx1.6mm
• Material: Powder-coated aluminium – rust-resistant & weatherproof
• Design: Sleek flat top – modern and minimal
• Safety: Complies with Australian Pool Safety Standard AS1926.1
• Installation: Lightweight and easy to install – DIY-friendly
• Finish: Durable powder coat – low maintenance, no repainting
• Ideal For: Overcoming Step points and retaining walls as the start and ends of runs

Black 1800mm In-Ground Aluminium Post with Dress Ring

50mm Diameter x 50mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 50mm Diameter
• 50mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

700x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 700mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 25kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1050x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 1050mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

1800 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 65kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

946x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door.

• Width: 946mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.8kg
• Overall Finished Width: 950mm

Requires 2 x Glass Brace Brackets  and 1 x Wall Bracket for Installation.

Glass to Back Wall Brace Bracket - Chrome Plated - For Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required
• Made from Brass

This shower screen support arm is also available in:

• Matt Black
• Matt White
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Square Matt Black Shower Screen Door Handle

• Square D Handle Shower Screen Door Handle
• Stainless Steel in Matt Black Finish
• Back to back pull handles
• Suits 8mm, 10mm and 12mm thick glass
• Requires 2 x 12mm holes at 155mm centres
• Nylon spacers and gaskets included to prevent glass/metal contact

This glass shower screen door handle is also available in:

• Polished Chrome

Bostik Grout - HES 20kg Bag - Used for Core Hole installation

Bostik Grout - HES 20kg Bag

Used to install Core Hole Spigots

Click to View Data Sheet

25x21mm Extended Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Extened Wall Plate for use with Face Mount Glass Balustrade
• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

922(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Black 2400mm In-Ground Aluminium Post with Dress Ring

750x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 750mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 27kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1100x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 1100mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

947(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Glass to Ceiling Adjustable Brace Bracket - Chrome Plated - For Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the ceiling.

• Ceiling to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required
• Made from Brass with Stainless Steel Tube

Square L Shape Matt Black Shower Screen Door Knob

• Square L Shape Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

Black 50mm Diameter x 50mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• Black
• 50mm Diameter
• 50mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

956x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 956mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.9kg
• Overall install width: 960mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Mid Black 1500mm Face Mount Aluminium Post

Enhance your fencing project with our premium 1500mm high aluminium face mount posts, designed for strength, style, and long-term performance. Ideal for pool fencing, balustrades, and privacy screens, these posts offer a sleek, professional finish for any installation.

Key Features:

• High-Quality Material: Crafted from heavy-duty 50x50mm aluminium with a robust 4mm wall thickness.
• Strong Base Plate: Pre-welded 10mm thick aluminium face plate for secure mounting to walls, concrete, or decking edges.
• Corrosion Resistant: Rust-free aluminium construction, perfect for coastal and outdoor environments.
• Pool Fence Compliant: Manufactured to meet Australian Standard AS1926.1 when installed correctly.
• Easy Installation: Pre-drilled face plates allow for fast, secure fixing. Easily cut to length with drop saw.

Specifications:

• Finish: Middle/Centre
• Height: 1500mm
• Finish: Black
• Post Dimensions: 50mm x 50mm with 4mm wall thickness
• Face Plate Thickness: 10mm
• Material: Aluminium Alloy 6061 T6

Perfect for:

Pool fencing, garden fencing, privacy screens, and residential or commercial fencing projects where a professional and compliant finish is essential.

50mm Diameter Adjustable Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 50mm Diameter
• Adjusts between 23 and 40mm
• Ideal for fixing to an uneven surface
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod for masonry
• Install using M12 Metric to Lag Screw for timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

800x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 29kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1150x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 1150mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

Square Recessed Matt Black Shower Screen Door Knob

• Square Recessed Shape Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This glass shower screen door knob is also available in:

• Polished Chrome

Round Glass to Wall Adjustable Horizontal Support Arm - Chrome Plated - For Shower Screen

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required
• Made from Brass with Stainless Steel Tube

972(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

966x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 966mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.9kg
• Overall install width: 970mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

End Black 1500mm Face Mount Aluminium Post (Left and Right)

Enhance your fencing project with our premium 1500mm high aluminium face mount posts, designed for strength, style, and long-term performance. Ideal for pool fencing, balustrades, and privacy screens, these posts offer a sleek, professional finish for any installation.

Key Features:

• High-Quality Material: Crafted from heavy-duty 50x50mm aluminium with a robust 4mm wall thickness.
• Strong Base Plate: Pre-welded 10mm thick aluminium face plate for secure mounting to walls, concrete, or decking edges.
• Corrosion Resistant: Rust-free aluminium construction, perfect for coastal and outdoor environments.
• Pool Fence Compliant: Manufactured to meet Australian Standard AS1926.1 when installed correctly.
• Easy Installation: Pre-drilled face plates allow for fast, secure fixing. Easily cut to length if required. 

Specifications:

• Position: End Post Pack (Left & Right Posts)
• Finish: Black
• Height: 1500mm
• Post Dimensions: 50mm x 50mm with 4mm wall thickness
• Face Plate Thickness: 10mm
• Material: Aluminium Alloy 6061 T6

Perfect for:

Pool fencing, garden fencing, privacy screens, and residential or commercial fencing projects where a professional and compliant finish is essential.

850x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 850mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 31kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1200x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 1200mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

Epoxy 2 part metal glue

• 24ml
• Bonds metal to metal
• Use to glue all handrail joints that are not welded
• Resealable nozzle
• Mixing Tray and stick included

40mm Square Cap x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 40mm Square Cap
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod for Masonry
• Install using M12 Metric to Lag Screw for timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing rods sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

997(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Round Matt Black Shower Screen Door Knob

• Round with finger notch Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm Hole in the Glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This round glass shower screen door knob is also available in:

• Polished Chrome

976x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 976mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.9kg
• Overall install width: 980mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

900x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 900mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 32kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

Standoff Tool

• Tighten and loosen 38mm and 50mm diameter standoffs
• Made from 316 Stainless Steel

Square Chrome Shower Screen Door Handle

• Square D Handle Shower Screen Door Handle
• Stainless steel in a mirror finish
• Back to back pull handles
• Suits 8mm, 10mm and 12mm thick glass
• Requires 2 x 12mm holes at 155mm centres
• Nylon spacers and gaskets included to prevent glass/metal contact

This glass shower screen door handle is also available in:

• Matt Black

Round Recessed Matt Black Shower Screen Door Knob

• Round Recessed Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This round glass shower screen door knob is also available in:

• Polished Chrome

1022(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Glass to Glass Spring Hinge

• Glass to Glass Gate Hinge
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• Suits 12mm Hinge Panel
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• Hinge panel needs to be drilled 4 x 14mm Holes (40mm in from the side and 60mm apart)
• For best results allow for a 10mm gap between the hinge panel and gate

986x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 986mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 3.0kg
• Overall install width: 990mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Black 1800(h)x1450(w)mm Raked Aluminium Flat Top Pool Fence Panel

• Panel Size: 1800mm (H) × 1450mm (W)
• Pickets: 16mm (D) x 1.2mm (T) (alloy 6063-T6)
• Picket Spacing: 72.1mm gap with 88.1mm centre
• Rails: 38mmx25mmx1.6mm
• Material: Powder-coated aluminium – rust-resistant & weatherproof
• Design: Sleek flat top – modern and minimal
• Safety: Complies with Australian Pool Safety Standard AS1926.1
• Installation: Lightweight and easy to install – DIY-friendly
• Finish: Durable powder coat – low maintenance, no repainting
• Ideal For: Overcoming Step points and retaining walls as the start and ends of runs

950x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 950mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 34kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

M12 x 120mm Threaded Rod

• M12 Heavy Duty
• 120mm overall length
• Allows installation into concrete by using a chemical anchor
• Allows installation through steel using an M12 nut or tapped thread
• Suits all standoffs

1047(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

996x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door.

• Width: 996mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 3.0kg
• Overall Finished Width: 1000mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Round D Chrome Shower Screen Door Handle

• Round D Handle Shower Screen Door Handle
• Stainless steel in a mirror finish
• Pull Knob on inside of Door Panel and D Handle on the outside
• Suits 8mm, 10mm and 12mm thick glass
• Requires 2 x 12mm holes at 155mm centres
• Nylon spacers and gaskets included to prevent glass/metal contact

Polaris S155 Series – Soft Close Glass-to-Glass Pool Fence Hinges

Turn your economy gate into a premium soft-close system!

Product Highlights:

• NEW & Innovative Design – Instantly upgrade standard or economy pool gates with a soft-close system.
• Retrofit-Friendly – Multiple hole spacings for easy replacement of existing hinges—no new drilling required. (See images for glass hole positions)
• Hydraulic Soft-Close Technology – Smooth, quiet, and controlled closing action for added safety and style.
• Glass-to-Glass Mounting – Perfect for 8–12mm toughened glass panels in frameless pool fencing.
• Heavy-Duty Performance – Supports gates up to 45kg and 1000mm wide.
• 316 Marine Grade Stainless Steel – Rust-resistant and ideal for coastal or saltwater pool environments.
• Fully Adjustable – Fine-tune gate tension and alignment with built-in tools for perfect operation.
• Stylish Finish Options – Choose from Polished Stainless, Matte Black, or Brushed Satin.
• Standards Compliant – Exceeds Australian Safety Standard AS1926.1-2012 for pool fencing.

What’s Included:

• 2 × Polaris S155 Soft Close Hinges
• 1 × Adjustment Tool Kit
• 1 × Installation Manual

Ideal For:

• Retrofitting existing pool gates with spring hinges
• Frameless glass pool fencing systems
• Residential & commercial installations
• Coastal, high-moisture, and saltwater environments

1000x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1000mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 36kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

M12 x 1000mm Threaded Rod

• M12 Heavy Duty
• 1000mm overall length
• Allows installation into concrete by using a chemical anchor
• Allows installation through steel using an M12 nut or tapped thread
• Suits all standoffs

1097(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Square L Shape Chrome Shower Screen Door Knob

• Square L Shape Knob for Shower Screen Door
• Chrome Plate Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This glass shower screen door knob is also available in

• Matt Black

1006x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 1006mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 3.0kg
• Overall install width: 1010mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

1050x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1050mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 38kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1147(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Square Recessed Chrome Shower Screen Door Knob

• Square Recessed Shape Knob for Shower Screen Door
• Chrome Plated Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This glass shower screen door knob is also available in:

• Matt Black

1016x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 1016mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 3.0kg
• Overall install width: 1020mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

1100x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1100mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 40kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

115mm Lag Screw to Metric Thread

• M12 Heavy Duty Screw
• 115mm overall length
• Allows installation into timber or composite material
• Suits all standoffs
• Hex drive allen head.

1197(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Slimline Round Chrome Shower Screen Door Knob

• Slimline 25mm Diameter Round Knob for Glass Shower Screen Door
• Chrome Plated Finish
• Double pull knob
• Suits 6mm, 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This round glass shower screen door knob is also available in:

• Matt Black
• Matt White
• Brushed Brass/Gold
• Brushed Nickel
• Gunmetal Grey

1026x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 1026mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 3.1kg
• Overall install width: 1030mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

1150x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1150mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 41kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

160mm Lag Screw to Metric Thread

• M12 Heavy Duty Screw
• 160mm overall length
• Allows installation into timber or composite material
• Suits all standoffs
• Hex drive allen head.

1297(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Round Chrome Shower Screen Door Knob

• Round with finger notch Knob for Glass Shower Screen Door
• Chrome Plated Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This round glass shower screen door knob is also available in:

• Matt Black

Glass to Wall/Post Spring Hinge

• Glass to Wall/Square Post
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 22mm between the gate and post

Glass to Glass 90 Degree Internal Angle Pool Fence Gate Latch

Secure your glass gates with confidence using our 90° Glass-to-Glass Internal Angle Latch. Perfect for glass pool fencing or glass balustrade gates, this latch is designed for strength, style, and easy installation. Featuring a durable construction and multiple finish options, it provides both premium corrosion resistance and a modern aesthetic to suit any project.

Key Features:

• Designed for 90° internal glass-to-glass connections
• Available in two models: Economy (cost-effective) and Deluxe (premium finish and durability)
• Available in four stylish finishes:
  • Polished Stainless Steel
  • Satin Stainless Steel
  • Black
  • White
• 316-grade stainless steel backing plates for superior corrosion resistance
• Sleek, UV-stabilised black polymer latch on economy models
• Suits 8mm, 10mm, and 12mm thick glass gates
• No holes required in the latch panel (fixed side)
• Easy installation – gate requires two 10mm holes (20mm in from edge, spaced 42mm apart)
• Recommended 9mm gap between gate and latch panel for optimal performance

Installation Notes:

• Gate panel must be 8mm, 10mm, or 12mm thick.
• Latch panel must be 12mm thick (no drilling required).

Perfect for:

• Glass pool fence gates
• Glass balustrade gates
• Residential or commercial glass installations

Choose your model and finish — and secure your gate with style and strength using our premium 90° Glass-to-Glass Latch!

1036x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 1036mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 3.1kg
• Overall install width: 1040mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

975x1200mm Aluminium Flat Top Pool Fence Gate

• Gate Size: 975mm (W) × 1200mm (H)
• Material: Powder-coated aluminium – rust-resistant & weatherproof
• Design: Sleek flat top – modern and minimal
• Safety: Complies with Australian Pool Safety Standard AS1926.1
• Installation: Lightweight and easy to install – DIY-friendly
• Finish: Durable powder coat – low maintenance, no repainting
• Ideal For: Pool fencing, garden borders, pet-safe enclosures
• Available Colours: Black, Monument, White

Note: You will need to order Hinges and a Latch for your gate separately.

1200x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1200mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 43kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1397(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

1046x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 1046mm •Depth: 150mm •Thickness: 8mm •Weight: 3.1kg •Use With Hinge Panel: 429mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Round Recessed Chrome Shower Screen Door Knob

• Round Recessed Knob for Glass Shower Screen Door
• Chrome Plated
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the door
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This round glass shower screen door knob is also available in:

• Matt Black

Polaris S155 Series – Soft Close Glass-to-Wall Pool Fence Hinges

Turn your economy gate into a premium soft-close system!

Product Highlights:

• NEW & Innovative Design – Instantly upgrade standard or economy pool gates with a soft-close system.
• Retrofit-Friendly – Multiple hole spacings for easy replacement of existing hinges—no new drilling required. (See images for glass hole positions)
• Hydraulic Soft-Close Technology – Smooth, quiet, and controlled closing action for added safety and style.
• Glass-to-Glass Mounting – Perfect for 8–12mm toughened glass panels in frameless pool fencing.
• Heavy-Duty Performance – Supports gates up to 45kg and 1000mm wide.
• 316 Marine Grade Stainless Steel – Rust-resistant and ideal for coastal or saltwater pool environments.
• Fully Adjustable – Fine-tune gate tension and alignment with built-in tools for perfect operation.
• Stylish Finish Options – Choose from Polished Stainless, Matte Black, or Brushed Satin.
• Standards Compliant – Exceeds Australian Safety Standard AS1926.1-2012 for pool fencing.

What’s Included:

• 2 × Polaris S155 Soft Close Hinges
• 1 × Adjustment Tool Kit
• 1 × Installation Manual

Ideal For:

• Retrofitting existing pool gates with spring hinges
• Frameless glass pool fencing systems
• Residential & commercial installations
• Coastal, high-moisture, and saltwater environments

1250x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1250mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 45kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1056x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 1056mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 3.2kg
• Overall install width: 1060mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

1300x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1300mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 47kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

35mm Deep 2100mm Long Chrome Shower Screen Aluminium U Channel

• 35mm Deep Anodised Aluminium Channel
• Adds 10mm to 25mm to the overall glass width
• High Polished Chrome Look Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 15mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

1066x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 1066mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 3.2kg
• Overall install width: 1070mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

1350x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1350mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 49kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1076x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 1076mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 3.2kg
• Overall install width: 1080mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

1400x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1400mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 50kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1086x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 1086mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 3.3kg
• Overall install width: 1090mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

1200mm Aluminium Gate Converter Kit - Pair

Easily transform your 1200mm high flat-top aluminium fence panel into a custom-width gate with this DIY converter kit. Designed for panels with 38x25mm horizontal rails, it offers a cost-effective alternative to custom-made gates.

Features:

• Converts standard fence panels into gates up to 1500mm wide
• Compatible with 1200mm high panels featuring 38x25mm horizontal rails
• Simple installation: cut panel to size, insert converters, and secure with included screws
• Pool fence compliant when used with a 1200mm high panel and a gap of 80mm or less between picket edge and inner gate stile edge
• Durable powder-coated aluminium construction
• Includes: 2 converters (left & right) and 4 screws

Note: Hinges and latch sold separately.

Face Mount Lockable Latch

Upgrade your gate latch in minutes! The D&D Face Mount Lockable Latch easily retrofits over most economy latches, adding secure, padlock-ready functionality without needing a full replacement. Built tough for outdoor use, it's the fast, affordable way to boost your gate security.

Features:

• Converts economy latches to lockable
• Easy face-mount installation
• Durable, weather-resistant materials
• Fits most standard latch types
• Padlock compatible (padlock not included)
• Trusted D&D Technologies quality

Ideal for:

Garden gates, side entrances, and residential gates.

Secure your gate today with D&D – simple, strong, and built to last!

1450x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1450mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 52kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1096x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 1096mm •Depth: 150mm •Thickness: 8mm •Weight: 3.3kg •Use With Hinge Panel: 479mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Polaris S155 Series – Soft Close Glass-to-Round Post Pool Fence Hinges

Turn your economy gate into a premium soft-close system!

Product Highlights:

• NEW & Innovative Design – Instantly upgrade standard or economy pool gates with a soft-close system.
• Retrofit-Friendly – Multiple hole spacings for easy replacement of existing hinges—no new drilling required. (See images for glass hole positions)
• Hydraulic Soft-Close Technology – Smooth, quiet, and controlled closing action for added safety and style.
• Glass-to-Glass Mounting – Perfect for 8–12mm toughened glass panels in frameless pool fencing.
• Heavy-Duty Performance – Supports gates up to 45kg and 1000mm wide.
• 316 Marine Grade Stainless Steel – Rust-resistant and ideal for coastal or saltwater pool environments.
• Fully Adjustable – Fine-tune gate tension and alignment with built-in tools for perfect operation.
• Stylish Finish Options – Choose from Polished Stainless or Brushed Satin.
• Standards Compliant – Exceeds Australian Safety Standard AS1926.1-2012 for pool fencing.

What’s Included:

• 2 × Polaris S155 Soft Close Hinges
• 1 × Adjustment Tool Kit
• 1 × Installation Manual

Ideal For:

• Retrofitting existing pool gates with spring hinges
• Frameless glass pool fencing systems
• Residential & commercial installations
• Coastal, high-moisture, and saltwater environments

1500x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 1500mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 54kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail