90° Bracket for Sliding Shower Screen

Required when installing a sliding shower door with a glass return panel.

300mm Top Infill Rubber for Versatilt Channel

906x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 906mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.7kg
• Overall install width: 910mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Black 1600mm Base Plate Aluminium Post with Cover

Cover for Round Spigots

Neatly fits over core hole or base plate spigot to hide fixing.

38mm Flat End Cap for Glass Balustrade Offset Rail

• 38mm Flat End Cap
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

50mm Diameter x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 50mm Diameter
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing rods sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

550x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 550mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 20kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

900x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 900mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

10mm x 100mm Counter Sunk Screws x 4 pack

• 316 Grade Stainless
• Hex Head Drive
• Self Tapping
• 100mm long
• 18mm Outer Diameter Head
• Ideal for use with Square and Round Base Plate Spigots into timber
• 1 pack required per spigot

1500 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1500mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 54kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

847(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

579(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

Glass Hinge Panel Specifications

Offset Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Chrome Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Small Glass Brace Bracket - Matt Black - For Glass Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Matt Black Finish
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

38mm Slotted Extended Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Used to attach 38mm Round Slotted rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Bostik 6S Glass Shower Screen Glazing Silicon

• 300g Tube
• Translucent Finish
• High Performance
• Natural Cure
• Build in Mould Inhabitor

Versatilt – 15mm Glazing Rubber Kit

916x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 916mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.7kg
• Overall install width: 920mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

25x21mm Slotted End Cap for Glass Balustrade / Pool Fence Top Rail

• Used to attach the rail to a post or wall. Simply screw the end cap on then slide the rail over
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish