Offset Wall to Glass Matt Black Shower Screen Door Hinge

2 required per door

• Offset Wall to Glass Hinge
• Matt Black Finish
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt White
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Wall to Glass Matt Black Shower Screen Door Hinge

2 required per door

• Wall to Glass Hinge
• Matt Black Finish
• 4 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt White
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Square Matt Black Shower Screen Door Handle

• Square D Handle Shower Screen Door Handle
• Stainless Steel in Matt Black Finish
• Back to back pull handles
• Suits 8mm, 10mm and 12mm thick glass
• Requires 2 x 12mm holes at 155mm centres
• Nylon spacers and gaskets included to prevent glass/metal contact

This glass shower screen door handle is also available in:

• Polished Chrome

Slimline Round Matt Black Shower Screen Door Knob

• Round Slimline Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This round glass shower screen door knob is also available in:

• Polished Chrome
• Matt White
• Brushed Brass/Gold
• Brushed Nickel
• Gunmetal Grey

Round Matt Black Shower Screen Door Knob

• Round with finger notch Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm Hole in the Glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This round glass shower screen door knob is also available in:

• Polished Chrome

Round Recessed Matt Black Shower Screen Door Knob

• Round Recessed Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This round glass shower screen door knob is also available in:

• Polished Chrome

Square L Shape Matt Black Shower Screen Door Knob

• Square L Shape Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

Square Recessed Matt Black Shower Screen Door Knob

• Square Recessed Shape Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This glass shower screen door knob is also available in:

• Polished Chrome

19mm Wide 2100mm long Matt Black Shower Screen Aluminium U Channel

• 19mm Slimline Anodised Aluminium Channel
• Adds 8mm to the overall glass width
• Matt Black Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

19mm Wide 2100mm long Matt Black Shower Screen Aluminium U Channel

• 19mm Slimline Anodised Aluminium Channel
• Adds 8mm to the overall glass width
• Matt Black Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

35mm Wide 2100mm long Matt Black Shower Screen Aluminium U Channel

• 35mm Slimline Anodised Aluminium Channel
• Adds 8mm to the overall glass width
• Matt Black Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 20mm)
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

35mm Wide 2100mm long Matt Black Shower Screen Aluminium U Channel

• 35mm Slimline Anodised Aluminium Channel
• Adds 8mm to the overall glass width
• Matt Black Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Matt Black Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

This product is also available in:

• Polished Chrome
• Matt White
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Matt Black Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Offset Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Wall Bracket
• Matt Black Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Offset Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Wall Bracket
• Matt Black Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Black Square Base Plate Spigot With Black Insulator

Stainless Steel Square Base Plate Spigot plus a thermoplastic non-conductive insulating sleve that fits over the top. 

Cover Specifications

• Made from ASA thermoplastic – excellent weather & chemical resistance and high impact strength
• Non-conductive material
• Includes 1x vertical spigot stem & 2·part domical cover
• Also includes 2x caps which fit into friction grub screw holes
• Firstly install vertical stem to spigot. Fix off base plate with countersunk fixings to substrate. Install the 2 part domical cover.
• Can be retro fitted to existing base plate Madrid spigots
• Specialty designed top section prevents chance of pulling insulating cover away from spigot and base plate

Select to colour match the spigot to the cover if you plan on removing the cover at a later date.

You will not need to earth your spigot if you use this product.

Polished Square Base Plate Spigot With Black Insulator

Stainless Steel Square Base Plate Spigot plus a thermoplastic non-conductive insulating sleve that fits over the top. 

Cover Specifications

• Made from ASA thermoplastic – excellent weather & chemical resistance and high impact strength
• Non-conductive material
• Includes 1x vertical spigot stem & 2·part domical cover
• Also includes 2x caps which fit into friction grub screw holes
• Firstly install vertical stem to spigot. Fix off base plate with countersunk fixings to substrate. Install the 2 part domical cover.
• Can be retro fitted to existing base plate Madrid spigots
• Specialty designed top section prevents chance of pulling insulating cover away from spigot and base plate

Select to colour match the spigot to the cover if you plan on removing the cover at a later date.

You will not need to earth your spigot if you use this product.

Polished Square Base Plate Spigot With Silver Gloss Insulator

Stainless Steel Square Base Plate Spigot plus a thermoplastic non-conductive insulating sleve that fits over the top. 

Cover Specifications

• Made from ASA thermoplastic – excellent weather & chemical resistance and high impact strength
• Non-conductive material
• Includes 1x vertical spigot stem & 2·part domical cover
• Also includes 2x caps which fit into friction grub screw holes
• Firstly install vertical stem to spigot. Fix off base plate with countersunk fixings to substrate. Install the 2 part domical cover.
• Can be retro fitted to existing base plate Madrid spigots
• Specialty designed top section prevents chance of pulling insulating cover away from spigot and base plate

Select to colour match the spigot to the cover if you plan on removing the cover at a later date.

You will not need to earth your spigot if you use this product.

Polished Square Base Plate Spigot With White Insulator

Stainless Steel Square Base Plate Spigot plus a thermoplastic non-conductive insulating sleve that fits over the top. 

Cover Specifications

• Made from ASA thermoplastic – excellent weather & chemical resistance and high impact strength
• Non-conductive material
• Includes 1x vertical spigot stem & 2·part domical cover
• Also includes 2x caps which fit into friction grub screw holes
• Firstly install vertical stem to spigot. Fix off base plate with countersunk fixings to substrate. Install the 2 part domical cover.
• Can be retro fitted to existing base plate Madrid spigots
• Specialty designed top section prevents chance of pulling insulating cover away from spigot and base plate

Select to colour match the spigot to the cover if you plan on removing the cover at a later date.

You will not need to earth your spigot if you use this product.