Your shopping cart is empty!
Your shopping cart is empty!
Used to stiffen and brace a Return/Fixed panel by tying it to the wall.
2 required per door
Maximum Door Weight when 2 hinges used is 35kg
Maximum Door Width when 2 hinges used is 800mm
2 required per door
Custom Mitre cut glass required for Hinge Panel
Maximum Door Weight when 2 hinges used is 35kg
Maximum Door Width when 2 hinges used is 800mm
2 required per door
Maximum Door Weight when 2 hinges used is 35kg
Maximum Door Width when 2 hinges used is 800mm
2 required per door
Maximum Door Weight when 2 hinges used is 35kg
Maximum Door Width when 2 hinges used is 800mm
Used to fix Hinge and Return/Fixed panels to the wall.
3 Per Panel recommended
Silicon must be used along glass edge when friction brackets used
Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.
Used to fix Hinge and Return/Fixed panels to the wall.
3 Per Panel recommended
These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.
Silicon must be used along glass edge when friction brackets used.
Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.
Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.
Can also be used to tie a Fixed panel back to the wall.
Tip: Place bracket ensuring glass door does not hit when swinging inwards.
Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.
Can also be used to tie a Fixed panel back to the wall.
Tip: Place bracket ensuring glass door does not hit when swinging inwards.
Used to stiffen and brace a Return/Fixed panel by tying it to the wall.