135 Degree Glass to Glass Brushed Brass / Gold Shower Screen Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Brushed Brass / Gold Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass 135 degree shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Nickel
• Gunmetal Grey

Offset Wall Bracket - Brushed Brass / Gold - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Brushed Gold Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Wall Bracket - Brushed Brass / Gold - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Brushed Brass / Gold Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

This product is also available in:

• Polished Chrome
• Matt Black
• Matt White
• Brushed Nickel
• Gunmetal Grey

Black Glass to Wall/Square Post Pool Fence Hinge Set

• Glass to Wall/Square Post
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 22mm between the gate and post

Matt Black Glass to Glass Pool Fence Gate Hinge Set

• Matt Black Glass to Glass Gate Hinge
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• Suits 12mm Hinge Panel
• 316 Grade Stainless powder coated backing plate
• Sold as a pair
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• Hinge panel needs to be drilled 4 x 14mm Holes (40mm in from the side and 60mm apart)
• For best results allow for a 16mm gap between the hinge panel and gate

Matt Black 25x21mm Adjustable Horizontal Joiner for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Joins 25x21mm Slotted Tube at a Corner that is not 90 degrees
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fit by Welding or epoxy glue

Matt Black 25x21mm In-Line Joiner for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Joins 2 straight lengths of 25x21mm Slotted Stainless Steel Tube
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Matt Black 25x21mm 90 Degree Joiner for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Joins 25x21mm Slotted Tube at a 90 degree angle (on a corner)
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Matt Black 25x21mm 90 Degree Vertical Joiner for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• allows you to run the rail down the side of the glass edge
• Fit by epoxy glue

Matt Black 25x21mm Adjustable Vertical Joiner for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Joins 25x21mm Slotted Tube at a change of Vertical Joiner (eg. Down Stairs)
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fit by Welding or epoxy glue

Matt Black 25x21mm Extended Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Black Powder Coated 316 grade Stainless Steel
• Extened Wall Plate for use with Face Mount Glass Balustrade
• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fit by Welding or epoxy glue

Glass to Wall - Offset Wall Clamp

Stainless Steel Offset Wall Clamp

Secure your glass panels with our premium offset wall clamp, designed for bracing glass to walls or posts.

• Friction-fit design for strong, reliable support
• Available in a Polished or Satin Finish Stainless Steel
• Ideal for bracing 12mm glass panels to posts or walls
• Retrofit-friendly – perfect for existing glass installations
• Easy to install with an offset hole for side-of-glass mounting
• Suitable for use on frameless glass pool fences

Black Glass to Wall - Offset Wall Clamp

Stainless Steel Offset Wall Clamp

Secure your glass panels with our premium offset wall clamp, designed for bracing glass to walls or posts.

• Friction-fit design for strong, reliable support
• Matt Black Finish
• Ideal for bracing 12mm glass panels to posts or walls
• Retrofit-friendly – perfect for existing glass installations
• Easy to install with an offset hole for side-of-glass mounting
• Suitable for use on frameless glass pool fences

Black Square Front, Flat Back Glass Clamp for Glass Balustrade / Pool Fence

Black, Square Front, Flat Back Glass Clamp

• Flat back for installation onto timber or steel post or brick wall
• Use for Glass Balustrade / Pool Fence
• Suitable for 8, 10 and 12mm Glass - Gaskets provided
• Black Powder Coated 316 Marine Grade Stainless Steel

This Glass Clamp is also available in:

• Stainless Steel
• Matt White

Matt Black 25x21mm End Cap for Glass Balustrade / Pool Fence Top Rail

• Powder Coated 316 grade Stainless Steel
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fit by Welding or epoxy glue

Matt Black 25x21mm Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Powder Coated 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Black Glass to Glass - Swivel - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Black Glass to Glass at an odd angle Corner
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• Friction fixed so not holes in glass required.
• Made from Powder Coated solid 316 Grade Stainless

Suitable for installation of a Frameless Glass Pool Fence.

Black Glass to Glass - Straight - Small - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Black Glass to Glass in a Straight Line
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• 75mm Long x 25mm Wide
• Minimum gap between glass panels is 20mm
• Maximum gap between glass panels is 50mm
• Friction fixed so not holes in glass required.
• Made from Powder Coated solid 316 Grade Stainless

Black Glass to Glass - Straight - Large - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Black Glass to Glass in a Straight Line
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• 140mm Long x 25mm Wide
• Minimum gap between glass panels is 20mm
• Maximum gap between glass panels is 95mm
• Friction fixed so not holes in glass required.
• Made from Powder Coated solid 316 Grade Stainless

Black Glass to Wall - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Black Glass to Wall/Post
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• Friction fixed so not holes in glass required.
• Made from Powder Coated solid 316 Grade Stainless
• 2 screws required (sold separately)

Black Glass to Glass - 90 Degree Corner - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Black Glass to Glass at a 90 Degree Corner
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• Friction fixed so not holes in glass required.
• Made from Powder Coated solid 316 Grade Stainless

This product is also available in Polished and Satin Finish Stainless Steel Here.

Cover for Matt Black Core Hole Spigot

Matt Black Anodise Aluminium Easy fits over Top Mount Base Plate spigot

Matt Black Core Hole Pool Fence Spigot

• Matt Black Powder Coated Stainless Steel
• Core Hole Installation
• Double Friction of easy glass alignment
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 45mm Front profile

Cover for Matt Black Base Plate Spigot

Matt Black Anodise Aluminium Easy fits over Top Mount Base Plate spigot

Matt Black Base Plate Spigot

• Matt Black Powder Coated Stainless Steel
• Easy Top Mount Base Plate Installation
• Double Friction of easy glass alignment
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 45mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation

Click Here to view to Base Plate Spigot installation guide

Square Front, Round Back Glass Clamp for Glass Balustrade / Pool Fence

Square Front, Round Back Glass Clamp

• Radius back for installation onto a 2 Inch Diameter Post
• Use for Glass Balustrade / Pool Fence
• Suitable for 8, 10 and 12mm Glass - Gaskets provided
• 316 Marine Grade Stainless Steel
• Available in Mirror or Satin finish

Square Front, Flat Back Glass Clamp for Glass Balustrade / Pool Fence

Square Front, Flat Back Glass Clamp

• Flat back for installation onto timber or steel post or brick wall
• Use for Glass Balustrade / Pool Fence
• Suitable for 8, 10 and 12mm Glass - Gaskets provided
• 316 Marine Grade Stainless Steel
• Available in Mirror or Satin finish

This Glass Clamp is also available in:

• Matt Black
• Matt White

D Front, Round Back Glass Clamp for Glass Balustrade / Pool Fence

D Front, Flat Back Glass Clamp for Glass Balustrade / Pool Fence

D Front, Flat Back Glass Clamp – Ideal for Glass Balustrading & Glass Pool Fencing

This Glass Clamp is also available in:

• Matt Black

38mm Diameter Flat Splashback Pin Cap

•316 Grade Stainless Steel •M12 thread in the back •12mm Thick with Bevelled Cap Finish •1mm Thick Washer Included You will also need to order the correct installation rod •Installation into timber will require a Lag Screw to Metric Thread •Installation into Brick/concrete will require a Threaded Rod

Glass to Glass - Swivel - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Glass to Glass at an odd angle Corner
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• Friction fixed so not holes in glass required.
• Made from solid 316 Grade Stainless
• Available in Mirror or Satin finish

Glass to Glass - 90 Degree Corner - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence or glass balustrade.

• Glass to Glass at a 90 Degree Corner
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• Friction fixed so not holes in glass required.
• Made from solid 316 Grade Stainless
• Available in Mirror or Satin finish

This product is also available in Matt Black Here.

Glass to Wall - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence.

• Glass to Wall/Post
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• Friction fixed so not holes in glass required.
• Made from solid 316 Grade Stainless
• Available in Mirror or Satin finish
• 2 screws required (sold separately)

Glass to Glass - Straight - Large - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence. or glass balustrade.

• Glass to Glass in a Straight Line
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• 140mm Long x 25mm Wide
• Minimum gap between glass panels is 20mm
• Maximum gap between glass panels is 95mm
• Friction fixed so not holes in glass required.
• Made from solid 316 Grade Stainless
• Available in Mirror or Satin finish

Suitable for installation of a Frameless Glass Pool Fence.

Glass to Glass - Straight - Small - Glass Brace for Stiffening Glass Pool Fences

Used as a rigidity brace on a glass pool fence.

• Glass to Glass in a Straight Line
• Use for Stiffening Glass Pool Fences
• Suitable for 12mm Glass
• 75mm Long x 25mm Wide
• Minimum gap between glass panels is 20mm
• Maximum gap between glass panels is 50mm
• Friction fixed so not holes in glass required.
• Made from solid 316 Grade Stainless
• Available in Mirror or Satin finish

Suitable for installation of a Frameless Glass Pool Fence.

Glass to Wall/Square Post Pool Fence Hinge Set

• Glass to Wall/Square Post
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 22mm between the gate and post

Glass to Glass Pool Fence Gate Hinge Set

• Glass to Glass Gate Hinge
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• Suits 12mm Hinge Panel
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• Hinge panel needs to be drilled 4 x 14mm Holes (40mm in from the side and 60mm apart)
• For best results allow for a 10mm gap between the hinge panel and gate

White 50mm Diameter x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• White
• 50mm Diameter
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

White 38mm Diameter x 25mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• White
• 38mm Diameter
• 25mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using  M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

White 38mm Diameter x 45mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• White
• 8mm Diameter
• 45mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

Black 50mm Diameter x 50mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• Black
• 50mm Diameter
• 50mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

Black 50mm Diameter x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• Black
• 50mm Diameter
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing rods sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

Black 38mm Diameter x 45mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• Black
• 8mm Diameter
• 45mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

Black 38mm Diameter x 25mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• Black
• 38mm Diameter
• 25mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using  M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

40mm Square Cap x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 40mm Square Cap
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod for Masonry
• Install using M12 Metric to Lag Screw for timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing rods sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

Standoff Tool

• Tighten and loosen 38mm and 50mm diameter standoffs
• Made from 316 Stainless Steel

M12 x 1000mm Threaded Rod

• M12 Heavy Duty
• 1000mm overall length
• Allows installation into concrete by using a chemical anchor
• Allows installation through steel using an M12 nut or tapped thread
• Suits all standoffs

M12 x 120mm Threaded Rod

• M12 Heavy Duty
• 120mm overall length
• Allows installation into concrete by using a chemical anchor
• Allows installation through steel using an M12 nut or tapped thread
• Suits all standoffs

160mm Lag Screw to Metric Thread

• M12 Heavy Duty Screw
• 160mm overall length
• Allows installation into timber or composite material
• Suits all standoffs
• Hex drive allen head.

115mm Lag Screw to Metric Thread

• M12 Heavy Duty Screw
• 115mm overall length
• Allows installation into timber or composite material
• Suits all standoffs
• Hex drive allen head.

50mm Diameter x 50mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 50mm Diameter
• 50mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

50mm Diameter x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 50mm Diameter
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing rods sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

50mm Diameter Adjustable Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 50mm Diameter
• Adjusts between 23 and 40mm
• Ideal for fixing to an uneven surface
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod for masonry
• Install using M12 Metric to Lag Screw for timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

38mm Diameter x 45mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 38mm Diameter
• 45mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

38mm Diameter x 25mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 38mm Diameter
• 25mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using  M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

38mm Diameter Adjustable Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 38mm Diameter
• Adjusts between 23 and 40mm
• Ideal for fixing to an uneven surface
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

Face Mount Lockable Latch

Upgrade your gate latch in minutes! The D&D Face Mount Lockable Latch easily retrofits over most economy latches, adding secure, padlock-ready functionality without needing a full replacement. Built tough for outdoor use, it's the fast, affordable way to boost your gate security.

Features:

• Converts economy latches to lockable
• Easy face-mount installation
• Durable, weather-resistant materials
• Fits most standard latch types
• Padlock compatible (padlock not included)
• Trusted D&D Technologies quality

Ideal for:

Garden gates, side entrances, and residential gates.

Secure your gate today with D&D – simple, strong, and built to last!

Glass to Glass 90 Degree Internal Angle Pool Fence Gate Latch

Secure your glass gates with confidence using our 90° Glass-to-Glass Internal Angle Latch. Perfect for glass pool fencing or glass balustrade gates, this latch is designed for strength, style, and easy installation. Featuring a durable construction and multiple finish options, it provides both premium corrosion resistance and a modern aesthetic to suit any project.

Key Features:

• Designed for 90° internal glass-to-glass connections
• Available in two models: Economy (cost-effective) and Deluxe (premium finish and durability)
• Available in four stylish finishes:
  • Polished Stainless Steel
  • Satin Stainless Steel
  • Black
  • White
• 316-grade stainless steel backing plates for superior corrosion resistance
• Sleek, UV-stabilised black polymer latch on economy models
• Suits 8mm, 10mm, and 12mm thick glass gates
• No holes required in the latch panel (fixed side)
• Easy installation – gate requires two 10mm holes (20mm in from edge, spaced 42mm apart)
• Recommended 9mm gap between gate and latch panel for optimal performance

Installation Notes:

• Gate panel must be 8mm, 10mm, or 12mm thick.
• Latch panel must be 12mm thick (no drilling required).

Perfect for:

• Glass pool fence gates
• Glass balustrade gates
• Residential or commercial glass installations

Choose your model and finish — and secure your gate with style and strength using our premium 90° Glass-to-Glass Latch!

Glass to Glass 90 Degree External Latch

• Glass to Glass at a 90 Degree External Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

Glass to Wall Pool Fence Latch

• Glass to Wall/Square Post
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are powder coated 316 Stainless Steel
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

Glass to Glass Pool Fence Latch - Straight Line

Glass to Wall/Post Spring Hinge

• Glass to Wall/Square Post
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 22mm between the gate and post

Polaris 125 Series Glass/Wall Hinges

The Polaris Soft Close Hinge is a state-of-the-art product unrivaled in design, style and safety

The Polaris soft close hinge is the safest and most reliable specially designed pool fence hinge in the industry that complies with the stringent Australian Standards AS1926 and AS 2820.

• New and improved 125 series hinge is now made with duplex SS2205 stainless steel
• Improved design features including commercial rated adjustable tension spring (tempered SS304) with multiple spring closing settings (soft, medium & strong) and the highest quality
• European made dampeners for smooth, soft close action
• Self closing hinge suitable for 10mm and 12mm thick glass gates
• Revolutionary anti-drop gate packing system significantly lowers the chance of gates dropping or sagging over time
• Easy installation process – install guide included in each box
• Available in polish, satin, matt black and matt white finishes

Polaris 125 Series Glass/Glass Hinges

The Polaris Soft Close Hinge is a state-of-the-art product unrivaled in design, style and safety

The Polaris soft close hinge is the safest and most reliable specially designed pool fence hinge in the industry that complies with the stringent Australian Standards AS1926 and AS 2820.

• New and improved 125 series hinge is now made with duplex SS2205 stainless steel
• Improved design features including commercial rated adjustable tension spring (tempered SS304) with multiple spring closing settings (soft, medium & strong) and the highest quality
• European made dampeners for smooth, soft close action
• Self closing hinge suitable for 10mm and 12mm thick glass gates
• Revolutionary anti-drop gate packing system significantly lowers the chance of gates dropping or sagging over time
• Easy installation process – install guide included in each box
• Available in polish, satin, matt black and matt white finishes

Click Here to View an installation video of these hinges

Polaris S155 Series – Soft Close Glass-to-Round Post Pool Fence Hinges

Turn your economy gate into a premium soft-close system!

Product Highlights:

• NEW & Innovative Design – Instantly upgrade standard or economy pool gates with a soft-close system.
• Retrofit-Friendly – Multiple hole spacings for easy replacement of existing hinges—no new drilling required. (See images for glass hole positions)
• Hydraulic Soft-Close Technology – Smooth, quiet, and controlled closing action for added safety and style.
• Glass-to-Glass Mounting – Perfect for 8–12mm toughened glass panels in frameless pool fencing.
• Heavy-Duty Performance – Supports gates up to 45kg and 1000mm wide.
• 316 Marine Grade Stainless Steel – Rust-resistant and ideal for coastal or saltwater pool environments.
• Fully Adjustable – Fine-tune gate tension and alignment with built-in tools for perfect operation.
• Stylish Finish Options – Choose from Polished Stainless or Brushed Satin.
• Standards Compliant – Exceeds Australian Safety Standard AS1926.1-2012 for pool fencing.

What’s Included:

• 2 × Polaris S155 Soft Close Hinges
• 1 × Adjustment Tool Kit
• 1 × Installation Manual

Ideal For:

• Retrofitting existing pool gates with spring hinges
• Frameless glass pool fencing systems
• Residential & commercial installations
• Coastal, high-moisture, and saltwater environments

Polaris S155 Series – Soft Close Glass-to-Wall Pool Fence Hinges

Turn your economy gate into a premium soft-close system!

Product Highlights:

• NEW & Innovative Design – Instantly upgrade standard or economy pool gates with a soft-close system.
• Retrofit-Friendly – Multiple hole spacings for easy replacement of existing hinges—no new drilling required. (See images for glass hole positions)
• Hydraulic Soft-Close Technology – Smooth, quiet, and controlled closing action for added safety and style.
• Glass-to-Glass Mounting – Perfect for 8–12mm toughened glass panels in frameless pool fencing.
• Heavy-Duty Performance – Supports gates up to 45kg and 1000mm wide.
• 316 Marine Grade Stainless Steel – Rust-resistant and ideal for coastal or saltwater pool environments.
• Fully Adjustable – Fine-tune gate tension and alignment with built-in tools for perfect operation.
• Stylish Finish Options – Choose from Polished Stainless, Matte Black, or Brushed Satin.
• Standards Compliant – Exceeds Australian Safety Standard AS1926.1-2012 for pool fencing.

What’s Included:

• 2 × Polaris S155 Soft Close Hinges
• 1 × Adjustment Tool Kit
• 1 × Installation Manual

Ideal For:

• Retrofitting existing pool gates with spring hinges
• Frameless glass pool fencing systems
• Residential & commercial installations
• Coastal, high-moisture, and saltwater environments

Polaris S155 Series – Soft Close Glass-to-Glass Pool Fence Hinges

Turn your economy gate into a premium soft-close system!

Product Highlights:

• NEW & Innovative Design – Instantly upgrade standard or economy pool gates with a soft-close system.
• Retrofit-Friendly – Multiple hole spacings for easy replacement of existing hinges—no new drilling required. (See images for glass hole positions)
• Hydraulic Soft-Close Technology – Smooth, quiet, and controlled closing action for added safety and style.
• Glass-to-Glass Mounting – Perfect for 8–12mm toughened glass panels in frameless pool fencing.
• Heavy-Duty Performance – Supports gates up to 45kg and 1000mm wide.
• 316 Marine Grade Stainless Steel – Rust-resistant and ideal for coastal or saltwater pool environments.
• Fully Adjustable – Fine-tune gate tension and alignment with built-in tools for perfect operation.
• Stylish Finish Options – Choose from Polished Stainless, Matte Black, or Brushed Satin.
• Standards Compliant – Exceeds Australian Safety Standard AS1926.1-2012 for pool fencing.

What’s Included:

• 2 × Polaris S155 Soft Close Hinges
• 1 × Adjustment Tool Kit
• 1 × Installation Manual

Ideal For:

• Retrofitting existing pool gates with spring hinges
• Frameless glass pool fencing systems
• Residential & commercial installations
• Coastal, high-moisture, and saltwater environments

Glass to Glass Spring Hinge

• Glass to Glass Gate Hinge
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• Suits 12mm Hinge Panel
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• Hinge panel needs to be drilled 4 x 14mm Holes (40mm in from the side and 60mm apart)
• For best results allow for a 10mm gap between the hinge panel and gate

Glass to Round Post Pool Fence Hinge Set

• Glass to Round Post Hinge Set
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 20mm between the gate and post

Glass to Round Post Deluxe Gate Pool Fence Latch

• Glass to Round Post Deluxe Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Latch is 316 Stainless Steel
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

1300x1900mm Perforated Pool Fence Transition Kit

Choose from two convenient mounting options — the Channel Kit or Bracket Kit — to suit your installation needs.

Available Kit Options

1. Channel Kit Includes:

• 1 x Perforated Aluminium Panel (1988mm x 1188mm)
• 1 x Framing Kit – delivers a clean, enclosed finish
• 2 x U Channels – for secure side-mount framing
• 50 x Stainless Steel Screws – corrosion-resistant for long-term use

2. Bracket Kit Includes:

• 1 x Perforated Aluminium Panel (1988mm x 1188mm)
• 1 x Framing Kit – provides a smooth, finished border
• 4 x Post Brackets – ideal for direct post-to-post installation
• 50 x Stainless Steel Screws – built for outdoor conditions

Style Options:

• Plain Perforated – Clean, minimalist perforations for a refined, modern look
• Decorative Palm Pattern – Adds a bold tropical touch, perfect for resort-style aesthetics

975x1200mm Perforated Pool Fence Gate

975mm x 1200mm Perforated Aluminium Gate Panel – Plain or Palm Pattern

• Dimensions: 975mm wide x 1200mm high
• Available Styles:
  • Plain Perforated – Clean, minimalist look
  • Palm Pattern – Decorative tropical design
• Colour Options: Black or Monument (durable powder-coated finish)
• Made from high-quality, rust-resistant aluminium
• Fully compliant with Australian Pool Fencing Standard AS1926.1
• Ideal for pool areas, garden gates, and modern fencing projects
• Lightweight yet sturdy construction for long-lasting performance
• Low-maintenance – resists corrosion, warping, and fading
• Matches our perforated panel and hardware range for a seamless finish

Hinges and Latch sold separately.

2000x1200mm Perforated Pool Fence Panel Kit

Choose from two convenient mounting options — the Channel Kit or Bracket Kit — to suit your installation needs.

Available Kit Options

1. Channel Kit Includes:

• 1 x Perforated Aluminium Panel (1988mm x 1188mm)
• 1 x Framing Kit – delivers a clean, enclosed finish
• 2 x U Channels – for secure side-mount framing
• 50 x Stainless Steel Screws – corrosion-resistant for long-term use

2. Bracket Kit Includes:

• 1 x Perforated Aluminium Panel (1988mm x 1188mm)
• 1 x Framing Kit – provides a smooth, finished border
• 4 x Post Brackets – ideal for direct post-to-post installation
• 50 x Stainless Steel Screws – built for outdoor conditions

Style Options:

• Plain Perforated – Clean, minimalist perforations for a refined, modern look
• Decorative Palm Pattern – Adds a bold tropical touch, perfect for resort-style aesthetics

975x1200mm Aluminium Barr Pool Fence Gate

• Gate Size: 975mm (W) × 1200mm (H)
• Available Colours: Black and White
• Pickets: 50mm x 25mm x 1.2mm (alloy 6063-T6)
• Picket Spacing: 93mm gaps
• Rails: 25mmx25mmx2.8mm
• Material: Powder-coated aluminium – rust-resistant & weatherproof
• Safety: Complies with Australian Pool Safety Standard AS1926.1
• Installation: Lightweight and easy to install – DIY-friendly
• Finish: Durable powder coat – low maintenance, no repainting
• Ideal For: Pool fencing, garden borders, pet-safe enclosures

2205x1200mm Aluminium Barr Pool Fence Panel

• Panel Size: 2205mm (W) × 1200mm (H)
• Available Colours: Black and White
• Pickets: 50mm x 25mm x 1.2mm (alloy 6063-T6)
• Picket Spacing: 93mm gaps
• Rails: 25mmx25mmx2.8mm
• Material: Powder-coated aluminium – rust-resistant & weatherproof
• Safety: Complies with Australian Pool Safety Standard AS1926.1
• Installation: Lightweight and easy to install – DIY-friendly
• Finish: Durable powder coat – low maintenance, no repainting
• Ideal For: Pool fencing, garden borders, pet-safe enclosures
• Cutting: Easily Cut with an Aluminium Cutting blade on a drop saw

Black 975x1200mm Aluminium Blade Pool Fence Panel

• 975mm Wide x 1200mm High Gate Panel
• 50mm x 16mm RHS pickets, face-welded to 40mm x 40mm x 2.4mm horizontal rails
• Four weld points per picket for maximum strength and durability
• Manufactured from high-grade Aluminium Alloy 6061 T6
• 79mm gap spacing between pickets for a sleek, compliant design
• Pre-inserted caps for a clean, finished look
• Complies with Australian Pool Fencing Standard AS1926.1

Black 2200x1200mm Aluminium Blade Pool Fence Panel

• 2200mm Wide x 1200mm High
• 50mm x 16mm RHS pickets, face-welded to 40mm x 40mm x 2.4mm horizontal rails
• Four weld points per picket for maximum strength and durability
• Manufactured from high-grade Aluminium Alloy 6061 T6
• 79mm gap spacing between pickets for a sleek, compliant design
• Pre-inserted caps for a clean, finished look
• Complies with Australian Pool Fencing Standard AS1926.1
• Panels can be easily cut down in width if required

Pool Pump Storage, Aluminium Slat Storage Closure, Bin Storage, Choose your size and colour