0 item:
 x 

Your shopping cart is empty!

Search Product

Guided Ordering

Direct Ordering

Stainless Steel Offset Top Mount
Rails for Glass Balustrade

Select Your Offset Top Rail

An offset rail is connected to the glass panel using a rail connector or offset bracket.

To install an offset rail you will need to use glass panels that have been pre-drilled with a 20mm diameter hole. Note that you are unable to install an offset rail if your glass does not have any holes.

Top Mount Offset Profiles available:

The tube is available in 2900mm and 5800mm lengths. There are a range of fittings available for each profile including, end caps, 90 Degree joiners, straight joiners and wall plates. In our more popular profiles we also have adjustable horizontal and vertical joiners available.

50x10mm Rectangle Stainless Steel Offset Top Rail

The Tube is available in both 2900mm and 5800mm lengths.

Fittings available include:

You will need to use a rail connector or Offset Bracket to attach the rail to the glass.

All fittings can be welded, Glued or pop-riveted to the rail.

All items are available in both Mirror and Satin finish.

Click Here

50x25mm Rectangle Stainless Steel Offset Top Rail for Glass Balustrading

The Tube is available in both 2900mm and 5800mm lengths.

Fittings available include:

You will need to use an Offset Bracket to attach the rail to the glass.

All fittings can be welded, Glued or pop-riveted to the rail.

All items are available in both Mirror and Satin finish.

Click Here

38mm Round Stainless Steel Offset Top Rail for Glass Balustrading

The Tube is available in both 2900mm and 5800mm lengths.

Fittings available include:

You will need to use an Offset Bracket to attach the rail to the glass.

All fittings can be welded, Glued or pop-riveted to the rail.

All items are available in both Mirror and Satin finish.

Click Here
  • Phone: 04142 66 624
  • Email: This email address is being protected from spambots. You need JavaScript enabled to view it.