Matt Black Glass to Glass Spring Hinge

• Matt Black Glass to Glass Gate Hinge
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• Suits 12mm Hinge Panel
• 316 Grade Stainless powder coated backing plate
• Sold as a pair
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• Hinge panel needs to be drilled 4 x 14mm Holes (40mm in from the side and 60mm apart)
• For best results allow for a 16mm gap between the hinge panel and gate

Product ID: MR-GGH-B

Matt Black Glass to Wall Pool Fence Latch

• Matt Black Glass to Wall/Square Post
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are powder coated 316 Stainless Steel
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

Product ID: MR-WGL-B

Matt Black Glass to Wall/Post Spring Hinge

• Matt Black
• Glass to Wall/Square Post
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 22mm between the gate and post

Product ID: MR-SPH-BLK

Matt Black Polaris 125 Series Glass/Glass Hinges

• 2205 grade stainless steel
• Self closing pool fence compliant safety hinge
• Tested to cycle count Australian Standards requirements
• Adjustable closing speed with European dampeners providing a soft close action
• Cone cap incorporated on bottom hinge for anti-toe hold
• Suits 10 or 12mm thick glass gates (max 45kg)

Click Here to View an installation video of these hinges

Product ID: PSC-125GG-B

Matt Black Polaris 125 Series Glass/Wall Hinges

• Matt Black Finish
• 2205 grade stainless steel
• 4x fixing holes to wall/post
• Self closing pool fence compliant safety hinge
• Tested to cycle count Australian Standards requirements
• Adjustable closing speed with European dampeners providing a soft close action
• Polymer cone cap supplied and can be fitted on bottom hinge for anti-toe hold
• Suits 10 or 12mm thick glass gates (max 45kg)
• Easy gate installation: firstly, fit hinges to gate and place gate in proposed position. Once in correct position, screw off to wall/post through 2 x outer holes. Then open the gate and screw off through 2 x inner holes.

Select to add a post adapter if you are using a 50mm round or 50x50 Square post.

Note: You will need to use a Deluxe Soft Close Glass to Wall Gate Panel with these hinges. The cut out in the glass needs to match the cut out specified for these hinges.

Product ID: PSC-125W-B

Matt Black Polaris 125 Series Glass/Wall Hinges with Round Post Adapter Plate

Includes Hinges + 50mm Round Post Adapter

• Matt Black Finish
• 2205 grade stainless steel
• 4x fixing holes to wall/post
• Self closing pool fence compliant safety hinge
• Tested to cycle count Australian Standards requirements
• Adjustable closing speed with European dampeners providing a soft close action
• Polymer cone cap supplied and can be fitted on bottom hinge for anti-toe hold
• Suits 10 or 12mm thick glass gates (max 45kg)
• Easy gate installation: firstly, fit hinges to gate and place gate in proposed position. Once in correct position, screw off to wall/post through 2 x outer holes. Then open the gate and screw off through 2 x inner holes.

Note: You will need to use a Deluxe Soft Close Glass to Wall Gate Panel with these hinges. The cut out in the glass needs to match the cut out specified for these hinges.

Product ID: PSC-125W-B / PSC-125PLATE-RP-B

Matt Black Polaris 125 Series Glass/Wall Hinges with Square Post Adapter Plate

Includes Hinges + 50mm Square Post Adapter

• Matt Black Finish
• 2205 grade stainless steel
• 4x fixing holes to wall/post
• Self closing pool fence compliant safety hinge
• Tested to cycle count Australian Standards requirements
• Adjustable closing speed with European dampeners providing a soft close action
• Polymer cone cap supplied and can be fitted on bottom hinge for anti-toe hold
• Suits 10 or 12mm thick glass gates (max 45kg)
• Easy gate installation: firstly, fit hinges to gate and place gate in proposed position. Once in correct position, screw off to wall/post through 2 x outer holes. Then open the gate and screw off through 2 x inner holes.

Note: You will need to use a Deluxe Soft Close Glass to Wall Gate Panel with these hinges. The cut out in the glass needs to match the cut out specified for these hinges.

Product ID: PSC-125W-B / PSC-125PLATE-SP-B

Matt Black Slimline Rail Wall Bracket

Matt Black Finish

Only required if using a 650mm modular Fixed Glass Panel

Product ID: STAL-RWBS-B

Matt Black Square Base Plated Spigot For 15mm Glass Balustrade

• Easy Top Mount Base Plate Installation
• Use for 15mm Glass Balustrade
• Friction Fit Glass (no holes in glass required)
• Suits 15mm thick glass
• 2205 Grade Stainless Steel
• 45mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Load test certificates available if required.
• Available in Mirror, Satin, Matt Black and Matt White finishes

Click Here to view to Base Plate Spigot installation guide

Product ID: MADDEL-SBP-B

Matt White 19mm Deep 2100mm Long Shower Screen Wall Channel

• 19mm Slimline Aluminium Channel
• Adds 8mm to the overall glass width
• Matt White Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 6mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Product ID: P-SNO-U-2100

Matt White 25x21mm 5800mm Long Slotted Rectangle Tube for Glass Balustrade / Pool Fence Top Rail

• Matt White
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fits directly onto the top of the glass
• 316 grade Stainless Steel
• 14x14mm Slot
• Install with glazing rubber or silicon directly to the glass

Product ID: STG-R5800-2521-MW

Matt White 25x21mm 90 Degree Joiner for Glass Balustrade / Pool Fence Top Rail

• Matt White
• Joins 25x21mm Slotted Tube at a 90 degree angle (on a corner)
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Product ID: STG-2521-90J-MW

Matt White 25x21mm End Cap for Glass Balustrade / Pool Fence Top Rail

• Matt White
• End Cap / Stop End
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Product ID: STG-2521-EC-MW

Matt White 25x21mm Extended Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Matt White
• Extended Wall Plate for use with Face Mount Glass Balustrade
• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Product ID: STG-2521-WPEXT-MW

Matt White 25x21mm Horizontal Adjustable Joiner for Glass Balustrade / Pool Fence Top Rail

• Matt White
• Joins 25x21mm Slotted Tube at a Corner that is not 90 degrees
• Bends up to 45 Degrees in both directions
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Product ID: STG-2521-HJA-MW

Matt White 25x21mm In-Line Joiner for Glass Balustrade / Pool Fence Top Rail

• Matt White
• Joins 2 straight lengths of 25x21mm Slotted Stainless Steel Tube
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Product ID: STG-2521-J-MW

Matt White 25x21mm Vertical Adjustable Joiner for Glass Balustrade / Pool Fence Top Rail

• Matt White
• Joins 25x21mm Slotted Tube at a change of Vertical Joiner (eg. Down Stairs)
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Product ID: STG-2521-VJA-MW

Matt White 25x21mm Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Matt White
• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue

Product ID: STG-2521-WP-MW

Matt White 35mm Deep 2100mm Long Shower Screen Wall Channel

• 35mm Deep Aluminium Channel
• Adds 10mm to 25mm to the overall glass width
• Matt White Finish
• Dry Glaze System - No need for silicon in glass
• Suits 10mm Glass
• Consider using where the wall is out of square (up to 15mm) or where a slimline channel looks is desired
• Unique Aluminium extrusion has internal ribs which hold secure 2part Clear Glazing PVC
• Fast Installation
• U-Channel & 2 Part Glazing PVC Included

Product ID: P-SNO-U-2100-EXT

Matt White Bottom Seat for Square Front Glass Clamps

• Matt White
• Install in the bottom of the glass clamp for the glass to sit on to stop the glass from slipping
• When used the glass clamp needs to be installed at the very bottom corner of the glass panel
• Required for heavy glass panels
• Suits our Square Front Matt White Finish Glass Clamps

Product ID: GC-S-SEAT-MW

Matt White End Cap for 35x35mm Aluminium Glass Top Rail

• Matt White
• 35mm W x35mm H x 4mm T
• Flat End Cap with Tab that presses into the cavity of the rail
• Includes one pointed grub screw in the tab to help secure the cap onto the rail

Note: 2 End Caps are supplied with each length of rail. Only order these if you need extras

Product ID: SER35-EC-MW

Matt White Flat Wall Plate for 35x35mm Aluminium Glass Top Rail

• Flat Wall Plate
• Matt White
• Ideal when it is a tight gap between the glass and the wall and a standard wall bracket will not fit
• 105mm W x 35mm H x 5mm T
• 2 Pcs per pack (1 x left and 1 x right handed)
• Screws to the end of the rail via 2 x Countersunk Holes in the wall bracket.
• 1 x 6.5mm Counter Sunk Fixing Hole
• Includes 4 x CSK Fixing Screws for securing the plates to the rail

Product ID: SER35-WPLATE-MW-2PK

Matt White Glass Shower Screen 135 Degree Door Hinge

2 required per door

• 135 Degree Glass to Glass Hinge
• Matt White Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass 135 degree shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Product ID: P-SNO-H-135

Matt White Glass Shower Screen Offset Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Matt White Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Product ID: P-SNO-WB-O

Matt White Glass Shower Screen Offset Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Matt White Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Product ID: P-SNO-WB-O

Matt White Glass Shower Screen Offset Wall to Glass Door Hinge

2 required per door

• Matt White Finish
• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Product ID: P-SNO-H-OP

Matt White Glass Shower Screen Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Matt White Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

This product is also available in:

• Polished Chrome
• Matt Black
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Product ID: P-SNO-WB

Matt White Glass Shower Screen Wall Bracket

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Matt White Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Product ID: P-SNO-WB

Matt White Glass to Back Wall Brace Bracket

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

This shower screen support arm is also available in:

• Polished Chrome
• Matt Black
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Product ID: P-SNO-ARM-A

Matt White Glass to Glass 90 Degree External Latch

• Glass to Glass at a 90 Degree External Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Latch and Backing plates are Matt White
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

Product ID: MR-FL90E-MW

Matt White Glass to Glass Pool Fence Latch

• Matt White Glass to Glass Latch - Straight Line
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are powder coated 316 Stainless Steel
• Economy Latch is Black Polymer
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

Product ID: MR-FLGG-MW

Matt White Glass to Glass Shower Screen Door Hinge

2 required per door

• Glass to Glass Hinge
• Matt White Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

This glass shower screen door hinge is also available in:

• Polished Chrome
• Matt Black
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Product ID: P-SNO-H-180

Matt White Glass to Glass Spring Hinge

• Matt White Glass to Glass Gate Hinge
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• Suits 12mm Hinge Panel
• 316 Grade Stainless powder coated backing plate
• Sold as a pair
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• Hinge panel needs to be drilled 4 x 14mm Holes (40mm in from the side and 60mm apart)
• For best results allow for a 16mm gap between the hinge panel and gate

Product ID: MR-GGH-MW

Matt White Glass to Wall Adjustable Horizontal Glass Shower Screen Support Arm

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

Product ID: P-SNO-ARM-1200

Matt White Glass to Wall Pool Fence Latch

• Matt White Glass to Wall/Square Post
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are powder coated 316 Stainless Steel
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

Product ID: MR-WGL-MW

Matt White Glass to Wall/Post Spring Hinge

• Matt White
• Glass to Wall/Square Post
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 22mm between the gate and post

Product ID: MR-SPH-MW

Matt White Large Glass Brace Bracket

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Product ID: P-SNO-GBB-L

Matt White Offset Wall Bracket for 35x35mm Aluminium Glass Top Rail

• Offset Wall Bracket
• Matt White
• 110mm W x 42mm H x 20mm D x 6mm T
• Rail fits inside the bracket cavity
• Internal cavity depth: 20mm
• 1 x 7mm Counter Sunk Fixing Hole
• Includes one pointed grub screw to secure bracket to rail

Product ID: SER35-WBEXT-MW

Matt White Polaris 125 Series Glass/Glass Hinges

• 2205 grade stainless steel
• Self closing pool fence compliant safety hinge
• Tested to cycle count Australian Standards requirements
• Adjustable closing speed with European dampeners providing a soft close action
• Cone cap incorporated on bottom hinge for anti-toe hold
• Suits 10 or 12mm thick glass gates (max 45kg)

Click Here to View an installation video of these hinges

Product ID: PSC-125GG-MW

Matt White Polaris 125 Series Glass/Wall Hinges

• Matt White Finish
• 2205 grade stainless steel
• 4x fixing holes to wall/post
• Self closing pool fence compliant safety hinge
• Tested to cycle count Australian Standards requirements
• Adjustable closing speed with European dampeners providing a soft close action
• Polymer cone cap supplied and can be fitted on bottom hinge for anti-toe hold
• Suits 10 or 12mm thick glass gates (max 45kg)
• Easy gate installation: firstly, fit hinges to gate and place gate in proposed position. Once in correct position, screw off to wall/post through 2 x outer holes. Then open the gate and screw off through 2 x inner holes.

Select to add a post adapter if you are using a 50mm round or 50x50 Square post.

Note: You will need to use a Deluxe Soft Close Glass to Wall Gate Panel with these hinges. The cut out in the glass needs to match the cut out specified for these hinges.

Product ID: PSC-125W-MW