650x970x12mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 650mm
• Height: 970mm
• Thickness: 12mm
• Weight: 19kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel
• Side Fix glass clamps

Glass is certified to AS1288:2006 Australian Standards

Product ID: 970NTG-0650

680x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 680mm
• Height: 850mm
• Thickness: 10mm
• Weight: 14kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

Product ID: 850BGH-0680

697(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Product ID: P-R-0697

700mm Sliding Shower Screen Door Panel

• Width:700mm
• Height:2038mm
• Thickness:10mm
• Weight: 36kg

A Sliding Door Fixed panel and Sliding door fitting kit will be required to fit this panel.

Click Here for easy ordering of a full sliding door shower screen kit.

Product ID: STAL-D-0700

700x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 700mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 26kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

Product ID: 1000FBG-0700

700x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 700mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 25kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

Product ID: 12N-0700

700x1280 x 15mm Glass With 4 x Bottom Holes for Standoffs

• Width: 700mm
• Height: 1280mm
• Thickness: 15mm
• 4 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

Product ID: 1280S-0700

700x1350x12mm Toughened Glass Pool Fence Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 700mm
• Height: 1350mm
• Thickness: 12mm
• Weight: 27kg

Suitable for installation with:

• Top Mount Friction Spigots
• Face Mount Friction Spigots
• Posts
• Deck Mount Channel
• Face Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Product ID: 12CG-0700

700x970x12mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 700mm
• Height: 970mm
• Thickness: 12mm
• Weight: 20kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel
• Side Fix glass clamps off posts

Product ID: 970NTG-0700

730x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 730mm
• Height: 850mm
• Thickness: 10mm
• Weight: 16kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

Product ID: 850BGH-0730

750 x 1200 x 8mm Glass Pool Fence Gate Panel

Glass Gate Panel.

• Width: 750mm
• Height: 1200mm
• Thickness: 8mm
• Weight: 18kg
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Product ID: 08SLG-0750

750 x 1200 x 8mm Spring Gate Panel

Economy Spring Hinge Glass Pool Fence Gate Panel

• 4 Widths available (750mm, 834mm, 890mm and 1000mm)
• Height: 1200mm
• Thickness: 8mm
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Install with Spring Hinges or Polaris 155 Series Soft Close Hinges

Product ID: 08SLG-0750

750mm Sliding Shower Screen Fixed Panel

• Width: 750mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 38kg

A Sliding Door Panel and Sliding door fitting kit will be required to fit this panel.

Click Here for easy ordering of a full sliding door shower screen kit.

Product ID: STAL-F-0750

750x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 750mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 28kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

Product ID: 1000FBG-0750

750x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 750mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 27kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

Product ID: 12N-0750

750x1280 x 15mm Glass With 4 x Bottom Holes for Standoffs

• Width: 750mm
• Height: 1280mm
• Thickness: 15mm
• 4 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

Product ID: 1280S-0750

750x1500 x 10mm Bath Fixed Shower Screen

Fixed Bath Top Shower Screen

• Width: 750mm
• Height: 1500mm
• Thickness: 10mm

Installation Widths:

• 753mm when installing with a wall bracket
• 760-765mm when installing with 19mm U Channel
• 760-775mm when installing with 35mm U Channel

You will also need to select your installation hardware by clicking here.

Product ID: P-BS-0750

750x970x12mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 750mm
• Height: 970mm
• Thickness: 12mm
• Weight: 22kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel
• Side Fix glass clamps

Glass is certified to AS1288:2006 Australian Standards

Product ID: 970NTG-0750

780x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 780mm
• Height: 850mm
• Thickness: 10mm
• Weight: 17kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

Product ID: 850BGH-0780

797(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Product ID: P-R-0797

800 x 1200 x 12mm Economy Spring Hinge Panels

Glass Gate Spring Hinge Panel. Used to swing a glass gate off.

• Width: 800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 29kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Install with Economy Glass Gate Panel and either glass to glass spring hinges or Polaris 155 series hinges.

Glass is certified to Australian Standards

Product ID: 12NH-0800

800 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 29kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Note: This panel will need to be secured to a post or another glass panel using Glass Braces or Glass Clamps. It will not hole a gate if only supported by Spigots.

Product ID: 12NH-0800

800 x 1200 x 12mm Glass to Wall/Post Soft Close Gate Panel

• 800mm wide x 1200mm high frameless gate
• 12mm Grade A toughened safety glass
• Glass-to-wall design for a clean, modern finish
• Soft close hinges (sold separately) for smooth, quiet closing
• Polished, high-quality glass edges
• Complies with Australian Pool Fencing Standard AS1926.1
• Ideal for pool fencing and outdoor areas
• Easy to install with soft close hinges and latch (not included)

Product ID: 12PWG-0800

800 x 1200 x 12mm Glass/Glass Soft Close Gate Panel

• 800mm wide x 1200mm high frameless gate
• 12mm Grade A toughened safety glass
• Glass-to-Glass layout
• Soft close hinges (sold separately) for smooth, quiet closing
• Polished, high-quality glass edges
• Complies with Australian Pool Fencing Standard AS1926.1
• Ideal for pool fencing and outdoor areas
• Easy to install with soft close hinges and latch (not included)

Product ID: 12PGG-0800

800 x 1200mm Premium Soft Close Hinge Panels

Premium Soft Close Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 29kg
• Cutouts: 2 x Cutouts to suit premium soft close hinges

Glass is certified to Australian Standards

Note: This panel will need to be secured to a post or another glass panel using Glass Braces or Glass Clamps. It will not hole a gate if only supported by Spigots.

Product ID: 12NPH-0800

800mm Sliding Shower Screen Door Panel

• Width:800mm
• Height:2038mm
• Thickness:10mm
• Weight: 41kg

A Sliding Door Fixed panel and Sliding door fitting kit will be required to fit this panel.

Click Here for easy ordering of a full sliding door shower screen kit.

Product ID: STAL-D-0800

800x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 800mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 30kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

Product ID: 1000FBG-0800

800x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 29kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

Product ID: 12N-0800

800x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 800mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

Product ID: 1280S-0800

800x1350x12mm Toughened Glass Pool Fence Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 800mm
• Height: 1350mm
• Thickness: 12mm
• Weight: 32kg

Suitable for installation with:

• Top Mount Friction Spigots
• Face Mount Friction Spigots
• Posts
• Deck Mount Channel
• Face Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Product ID: 12CG-0800

800x970x12mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 800mm
• Height: 970mm
• Thickness: 12mm
• Weight: 23kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel
• Side Fix glass clamps

Glass is certified to AS1288:2006 Australian Standards

Product ID: 970NTG-0800

830x850x10mm Toughened and Heat Soaked Glass with Polished edges

Glass is certified to Australian Standards

• Width: 830mm
• Height: 850mm
• Thickness: 10mm
• Weight: 18kg

Suitable for installation with:

• Posts
• Side Fix glass clamps

Product ID: 850BGH-0830

834 x 1200 x 8mm Glass Pool Fence Gate Panel

Glass Gate Panel.

• Width: 834mm
• Height: 1200mm
• Thickness: 8mm
• Weight: 20kg
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Product ID: 08SLG-0834

834 x 1200 x 8mm Spring Gate Panel

Economy Spring Hinge Glass Pool Fence Gate Panel

• 4 Widths available (750mm, 834mm, 890mm and 1000mm)
• Height: 1200mm
• Thickness: 8mm
• Hinge Holes: 4 x 10mm Holes to fix hinges
• Latch Holes: 2 x 10mm Holes to fix latch

Install with Spring Hinges or Polaris 155 Series Soft Close Hinges

Product ID: 08SLG-0834

846x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 846mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.5kg
• Overall Finished Width: 850mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Product ID: P-B-0846

847(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Product ID: P-R-0847

850mm Sliding Shower Screen Fixed Panel

• Width: 850mm
• Height: 2050mm
• Thickness: 10mm
• Weight: 44kg

A Sliding Door Panel and Sliding door fitting kit will be required to fit this panel.

Click Here for easy ordering of a full sliding door shower screen kit.

Product ID: STAL-F-0850

850x1000x15mm Toughened Glass Balustrade Panels with Polished edges

Toughened Glass Panel for Glass Balustrade

Glass is certified to Australian Standards

• Width: 850mm
• Height: 1000mm
• Thickness: 15mm
• Weight: 32kg
• Treatment: Toughened and Heat Soaked
• Edges: Polished all 4 sides

Suitable for installation with:

• 2 x Friction Spigots
• Glazing Channel

Product ID: 1000FBG-0850

850x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 850mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 31kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

Product ID: 12N-0850

850x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 850mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

Product ID: 1280S-0850