25x21mm Adjustable Horizontal Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 25x21mm Slotted Tube at a Corner that is not 90 degrees
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

38mm Slotted End Cap for Glass Balustrade / Pool Fence Top Rail

• 38mm End Cap
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

38mm Adjustable Joiner for Glass Balustrade Offset Rail

• Joins 2 lengths of 38mm Tube at non 90 degree corner
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

450x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 450mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 16kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

800x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 800mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

Glass to Round Post Deluxe Gate Pool Fence Latch

• Glass to Round Post Deluxe Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Latch is 316 Stainless Steel
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

1300 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1300mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 47kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

479(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

Glass Hinge Panel Specifications

896x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door. •Width: 896mm •Depth: 150mm •Thickness: 8mm •Weight: 2.7kg •Use With Hinge Panel: 279mm Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Chrome Plated Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

This product is also available in:

• Matt Black
• Matt White
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Offset Wall Bracket - Matt Black - For Glass Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Wall Bracket
• Matt Black Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

640(w)x2041(h)x10mm Glass Shower Screen Knob Open Door Panel

Glass Door Panel Specifications

697(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Slimline Rail Wall Bracket

Only required if using a 650mm modular Fixed Glass Panel

White 38mm Diameter x 45mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• White
• 8mm Diameter
• 45mm High Body
• Requires a 20mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

Black D Front, Flat Back Glass Clamp for Glass Balustrade / Pool Fence

D Front, Flat Back Glass Clamp – Ideal for Glass Balustrading & Glass Pool Fencing

Versatilt – 15mm Glass Pressure Plates

896x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 896mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.7kg
• Overall install width: 900mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Black 1300mm Base Plate Aluminium Post with Cover

25x21mm Adjustable Vertical Joiner for Glass Balustrade / Pool Fence Top Rail

• Joins 25x21mm Slotted Tube at a change of Vertical Joiner (eg. Down Stairs)
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Flat Dress Ring for Round Core Hole Spigot

Neatly fits over core hole spigot to hide grout

38mm Domed End Cap for Glass Balustrade Offset Rail

• 38mm Domed End Cap
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

38mm Diameter Adjustable Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 38mm Diameter
• Adjusts between 23 and 40mm
• Ideal for fixing to an uneven surface
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

500x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 500mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 18kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

850x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 850mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

Extender for Core Hole Spigots

• Use with Square and Round Core Hole Spigots
• Extends spigot by up to 200mm
• Made from 304 grade Stainless Steel

1400 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1400mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 50kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

797(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

529(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

Glass Hinge Panel Specifications

Adjustable Glass to Wall Square Black Horizontal Support Arm - For Glass Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Wall to Glass support arm
• Matt Black Finish
• Width Adjustable up to 1200mm - Simply cut the tube to the required width
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required

This glass shower screen support brace is also available in:

• Polished Chrome

90° Bracket for Sliding Shower Screen

Required when installing a sliding shower door with a glass return panel.

300mm Top Infill Rubber for Versatilt Channel

906x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 906mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.7kg
• Overall install width: 910mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Black 1600mm Base Plate Aluminium Post with Cover

25x21mm End Cap for Glass Balustrade / Pool Fence Top Rail

• 316 grade Stainless Steel
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Cover for Round Spigots

Neatly fits over core hole or base plate spigot to hide fixing.

38mm Flat End Cap for Glass Balustrade Offset Rail

• 38mm Flat End Cap
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

50mm Diameter x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 50mm Diameter
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing rods sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

550x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 550mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 20kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

900x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 900mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

10mm x 100mm Counter Sunk Screws x 4 pack

• 316 Grade Stainless
• Hex Head Drive
• Self Tapping
• 100mm long
• 18mm Outer Diameter Head
• Ideal for use with Square and Round Base Plate Spigots into timber
• 1 pack required per spigot

1500 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1500mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 54kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

847(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

579(w)x2050(h)x10mm Glass Shower Screen Hinge Panel

Glass Hinge Panel Specifications

Offset Wall Bracket - Chrome Plated - For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Chrome Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Small Glass Brace Bracket - Matt Black - For Glass Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Matt Black Finish
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

38mm Slotted Extended Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Used to attach 38mm Round Slotted rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

Bostik 6S Glass Shower Screen Glazing Silicon

• 300g Tube
• Translucent Finish
• High Performance
• Natural Cure
• Build in Mould Inhabitor

Versatilt – 15mm Glazing Rubber Kit

916x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 916mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.7kg
• Overall install width: 920mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

25x21mm Slotted End Cap for Glass Balustrade / Pool Fence Top Rail

• Used to attach the rail to a post or wall. Simply screw the end cap on then slide the rail over
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

600x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 600mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 22kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

950x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 950mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

1600 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1600mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 58kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Small Glass Brace Bracket - Chrome Plated - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 2 x compression/friction screws
• Slimline Design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Large Glass Brace Bracket - Matt Black - For Glass Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Matt Black Finish
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Black 50mm Diameter x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• Black
• 50mm Diameter
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing rods sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

20 x 1.5mm Thick Glass Setting Blocks

• 1.5mm THICK x 10mm WIDE x 50mm LONG CLEAR SETTING BLOCKS
• Pack of 20
• Install under any Hinge or Fixed panel to prevent it from sitting directly onto the tiles
• These are clear so will remain under the glass once the silicon has been applied

Ultraloc threadlocker 3242 Compound

10ml Bottle

Medium strength removable grade threadlocking compound

872(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

10 Pack Alignment Pins for Versatilt Channel

M10 x 120mm Stainless Threaded Rod, Nuts and Washers x 4 pack

• 4 x M10x120mm Stainless Steel Threaded Rods
• 4 x M10 Nuts
• 4 x M10 Washers
• Ideal for use with Square and Round Base Plate Spigots into Masonry or Steel
• 1 pack required per spigot

926x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 926mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.8kg
• Overall install width: 930mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

25x21mm Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

650x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 650mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 23kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1000x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 1000mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

897(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Large Glass Brace Bracket - Chrome Plated - For Shower Screen

Used to stiffen and brace a return or hinge panel by fixing a brace panel along the top and tying them together.

Can also be used to tie a Fixed panel back to the wall.

• Small Glass Brace Bracket
• Square Finish Edges
• Brace 8mm thick glass hood to 10mm thick return & hinge panels
• 4 x compression/friction screws
• Sturdy design
• No holes required in glass
• Made from solid brass

Tip: Place bracket ensuring glass door does not hit when swinging inwards.

Glass to Wall Adjustable Brace Bracket - Matt Black - For Glass Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Wall to Glass support arm
• Matt Black Finish
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required
• Made from Brass

This shower screen support arm is also available in:

• Polished Chrome
• Matt White
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

20 x 3mm Thick Glass Setting Blocks

• 3mm THICK x 10mm WIDE x 50mm LONG CLEAR SETTING BLOCKS
• Pack of 20
• Install under any Hinge or Fixed panel to prevent it from sitting directly onto the tiles
• These are clear so will remain under the glass once the silicon has been applied

Economy Spring Hinge Panels

Glass Gate Spring Hinge Panel. Used to swing a glass gate off.

• 11 Widths available (600mm, 800mm, 1000mm, 1100mm, 1200mm, 1300mm, 1400mm, 1500mm, 1600mm, 1700mm, 1800mm)
• Height: 1200mm
• Thickness: 12mm
• Holes: 4 x 14mm Holes to fix glass gate hinges

Install with Economy Glass Gate Panel and either glass to glass spring hinges or Polaris 155 series hinges.

Glass is certified to Australian Standards

White 50mm Diameter x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• White
• 50mm Diameter
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

Soudal- CA1400 Chemical Anchor 280ml

Soudal - Soudafix CA1400 (Vinylester) - 280ml Tube

High-Performance 2-Part Anchoring Resin for Heavy-Duty Fixings

The Soudafix CA1400 is a premium-grade, two-component vinylester anchoring resin designed for secure and long-lasting fixings in solid and hollow masonry. Packaged in a convenient 280ml tube, this resin is ideal for structural applications requiring high load-bearing strength.

Engineered for professional use, it's perfect for fixing threaded rods into concrete, brick, or stone—making it an excellent solution for base plate installations and facemount spigot fittings.

Key Features:

• Fast-curing formula for reduced downtime
• Suitable for use in damp or water-filled holes
• High chemical resistance, making it suitable for aggressive environments
• No expansion pressure, reducing the risk of substrate cracking
• Can be used with standard silicone applicators (no special tools required)

Applications:

• Structural anchoring of threaded rods and rebar
• Mounting of base plates, facemount spigots, railings, and heavy-duty fixtures
• Suitable for use in concrete, masonry, and stone substrates

Choose Soudafix CA1400 for reliable, heavy-duty anchoring with superior performance and ease of use.

936x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 936mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.8kg
• Overall install width: 940mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Black 1400(h)x1450(w)mm Raked Aluminium Flat Top Pool Fence Panel

• Panel Size: 1400mm (H) × 1450mm (W)
• Pickets: 16mm (D) x 1.2mm (T) (alloy 6063-T6)
• Picket Spacing: 72.1mm gap with 88.1mm centre
• Rails: 38mmx25mmx1.6mm
• Material: Powder-coated aluminium – rust-resistant & weatherproof
• Design: Sleek flat top – modern and minimal
• Safety: Complies with Australian Pool Safety Standard AS1926.1
• Installation: Lightweight and easy to install – DIY-friendly
• Finish: Durable powder coat – low maintenance, no repainting
• Ideal For: Overcoming Step points and retaining walls as the start and ends of runs

Black 1800mm In-Ground Aluminium Post with Dress Ring

50mm Diameter x 50mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 50mm Diameter
• 50mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

700x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 700mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 25kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1050x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 1050mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

1800 x 1200 x 12mm Glass Pool Fence Hinge Panel

Glass Gate Hinge Panel. Used to swing a glass gate off.

• Width: 1800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 65kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

946x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel about the door.

• Width: 946mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.8kg
• Overall Finished Width: 950mm

Requires 2 x Glass Brace Brackets  and 1 x Wall Bracket for Installation.

Glass to Back Wall Brace Bracket - Chrome Plated - For Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the wall.

• Back Wall to Glass support arm
• Double adjustability for easy installation. Adjustable at wall & at glass
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required
• Made from Brass

This shower screen support arm is also available in:

• Matt Black
• Matt White
• Brushed Nickel
• Brushed Brass/Gold
• Gunmetal Grey

Square Matt Black Shower Screen Door Handle

• Square D Handle Shower Screen Door Handle
• Stainless Steel in Matt Black Finish
• Back to back pull handles
• Suits 8mm, 10mm and 12mm thick glass
• Requires 2 x 12mm holes at 155mm centres
• Nylon spacers and gaskets included to prevent glass/metal contact

This glass shower screen door handle is also available in:

• Polished Chrome

Bostik Grout - HES 20kg Bag - Used for Core Hole installation

Bostik Grout - HES 20kg Bag

Used to install Core Hole Spigots

Click to View Data Sheet

25x21mm Extended Wall Plate for Glass Balustrade / Pool Fence Top Rail

• Extened Wall Plate for use with Face Mount Glass Balustrade
• Used to attach rail to flat post or wall
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

922(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Black 2400mm In-Ground Aluminium Post with Dress Ring

750x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 750mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 27kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1100x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 1100mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

947(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

Glass to Ceiling Adjustable Brace Bracket - Chrome Plated - For Shower Screen

Used to stiffen and brace a Return/Fixed panel by tying it to the ceiling.

• Ceiling to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required
• Made from Brass with Stainless Steel Tube

Square L Shape Matt Black Shower Screen Door Knob

• Square L Shape Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

Black 50mm Diameter x 50mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• Black
• 50mm Diameter
• 50mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod into masonry
• Install using M12 Metric to Lag Screw into timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

956x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 956mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.9kg
• Overall install width: 960mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

Mid Black 1500mm Face Mount Aluminium Post

Enhance your fencing project with our premium 1500mm high aluminium face mount posts, designed for strength, style, and long-term performance. Ideal for pool fencing, balustrades, and privacy screens, these posts offer a sleek, professional finish for any installation.

Key Features:

• High-Quality Material: Crafted from heavy-duty 50x50mm aluminium with a robust 4mm wall thickness.
• Strong Base Plate: Pre-welded 10mm thick aluminium face plate for secure mounting to walls, concrete, or decking edges.
• Corrosion Resistant: Rust-free aluminium construction, perfect for coastal and outdoor environments.
• Pool Fence Compliant: Manufactured to meet Australian Standard AS1926.1 when installed correctly.
• Easy Installation: Pre-drilled face plates allow for fast, secure fixing. Easily cut to length with drop saw.

Specifications:

• Finish: Middle/Centre
• Height: 1500mm
• Finish: Black
• Post Dimensions: 50mm x 50mm with 4mm wall thickness
• Face Plate Thickness: 10mm
• Material: Aluminium Alloy 6061 T6

Perfect for:

Pool fencing, garden fencing, privacy screens, and residential or commercial fencing projects where a professional and compliant finish is essential.

50mm Diameter Adjustable Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 50mm Diameter
• Adjusts between 23 and 40mm
• Ideal for fixing to an uneven surface
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod for masonry
• Install using M12 Metric to Lag Screw for timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

800x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 800mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 29kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1150x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 1150mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

Square Recessed Matt Black Shower Screen Door Knob

• Square Recessed Shape Knob for Shower Screen Door
• Matt Black Finish
• Double pull knob
• Suits 8mm, 10mm and 12mm thick glass
• Requires a 12mm hole in the glass
• Made from Solid Brass
• Nylon spacers and gaskets included to prevent glass/metal contact

This glass shower screen door knob is also available in:

• Polished Chrome

Round Glass to Wall Adjustable Horizontal Support Arm - Chrome Plated - For Shower Screen

Used to stiffen and brace a Return/Fixed panel by connecting it to the adjacent wall.

• Adjacent Wall to Glass support arm
• Adjustable length by cutting the tube to the required length.
• Maximum width of 1200mm
• Hidden fixing wall installation for a neat finish.
• Suitable for 8 and 10mm thick glass
• Compression/friction screws secure to the glass. No holes in glass required
• Made from Brass with Stainless Steel Tube

972(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel

You will also need to select your installation hardware by clicking here.

966x150x 8mm - Glass Brace - Clear Toughened Glass

Glass Brace panel used to Connect the hinge panel to a return panel above the door.

• Width: 966mm
• Depth: 150mm
• Thickness: 8mm
• Weight: 2.9kg
• Overall install width: 970mm

Requires 2 x Glass Brace Brackets and 1 x Wall Bracket for Installation.

End Black 1500mm Face Mount Aluminium Post (Left and Right)

Enhance your fencing project with our premium 1500mm high aluminium face mount posts, designed for strength, style, and long-term performance. Ideal for pool fencing, balustrades, and privacy screens, these posts offer a sleek, professional finish for any installation.

Key Features:

• High-Quality Material: Crafted from heavy-duty 50x50mm aluminium with a robust 4mm wall thickness.
• Strong Base Plate: Pre-welded 10mm thick aluminium face plate for secure mounting to walls, concrete, or decking edges.
• Corrosion Resistant: Rust-free aluminium construction, perfect for coastal and outdoor environments.
• Pool Fence Compliant: Manufactured to meet Australian Standard AS1926.1 when installed correctly.
• Easy Installation: Pre-drilled face plates allow for fast, secure fixing. Easily cut to length if required. 

Specifications:

• Position: End Post Pack (Left & Right Posts)
• Finish: Black
• Height: 1500mm
• Post Dimensions: 50mm x 50mm with 4mm wall thickness
• Face Plate Thickness: 10mm
• Material: Aluminium Alloy 6061 T6

Perfect for:

Pool fencing, garden fencing, privacy screens, and residential or commercial fencing projects where a professional and compliant finish is essential.

850x1200x12mm Toughened Glass Pool Fence / Balustrade Panels with Polished Edges

Glass is certified to Australian Standards

• Width: 850mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 31kg
• Edges: Polished
• Corners: 5mm Radius

Suitable for installation with:

• Friction Spigots
• Posts
• Deck Mount Channel
• Side Fix glass clamps

Used for:

• Glass Pool Fencing
• Face Mount Glass Balustrading

It can be installed with a Top Mounted Rail

1200x1280 x 15mm Glass With 6 x Bottom Holes for Standoffs

• Width: 1200mm
• Height: 1280mm
• Thickness: 15mm
• 6 x 22mm holes for Standoffs

Suitable for installation with:

• Glass Standoffs
• Top Mount Rail

Glass is certified to Australian Standards
Toughened and Heat Soaked Glass with Polished Edges

Epoxy 2 part metal glue

• 24ml
• Bonds metal to metal
• Use to glue all handrail joints that are not welded
• Resealable nozzle
• Mixing Tray and stick included

40mm Square Cap x 30mm Body Standoff for Face Mount Glass Balustrade / Pool Fence

• 40mm Square Cap
• 30mm High Body
• Requires a 20-22mm Diameter hole in the glass
• Install using M12 Threaded Rod for Masonry
• Install using M12 Metric to Lag Screw for timber
• Kit includes: Cap, Body, 2 x Plastic Washers and 1 x Bush
• For Face Mount Glass Balustrade / Pool Fence

M12 Fixing rods sold separately

• 120mm Threaded Rods - Suitable for Concrete or Steel
• 115mm Lag to Metric Threaded Screws - Suitable for Timber

997(w)x2050(h)x10mm Glass Shower Screen Return/Fixed Panel