• Black Powder Coated 316 grade Stainless Steel
• Joins 25x21mm Slotted Tube at a Corner that is not 90 degrees
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue

• Matt Black Glass to Glass Gate Hinge
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• Suits 12mm Hinge Panel
• 316 Grade Stainless powder coated backing plate
• Sold as a pair
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• Hinge panel needs to be drilled 4 x 14mm Holes (40mm in from the side and 60mm apart)
• For best results allow for a 16mm gap between the hinge panel and gate

• Glass to Wall/Square Post
• Use for Glass Pool Fence or Glass Balustrade Gate
• Suits 8 & 10mm Glass Gates
• 316 Grade Stainless
• Gate needs to be drilled with 4 x 10mm Holes (24mm in from the side and 47 apart)
• You will need to allow for a gap of 22mm between the gate and post

• Easy Top Mount Base Plate Installation
• Use for Glass Balustrade or Glass Pool Fence
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 45mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Suitable for Glass Balustrade or Pool Fence Applications
• Load test certificates available if required.
• Available in Mirror or Satin finish

Click Here to view to Base Plate Spigot installation guide

Use on glass balustrading or pool fencing.

• Easy Top Mount Base Plate Installation
• Friction Fit Glass (no holes in glass required)
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 50mm Front profile
• 4 x 11mm Counter Sunk Holes for timber screw or Countersunk bolt installation
• Suitable for Glass Balustrade or Pool Fence Applications
• Load test certificates& available if required.
• Available in Mirror or Satin finish.

Click Here to view our Base Plate Spigot Installation Guide

• Position: End
• Use: Glass Balustrade
• Material: 2" Mirror Finish Tube
• Height: 970mm
• Grade: 316 Marine Grade Stainless
• Base: 3 Hole Round Flange
• Top: 90 Degree Flush Joiner
• Glass: Install with 850mm Glass Panels
• Handrail: Install with 2 Inch Round Stainless Top Rail

• Glass to Glass Latch - Straight Line
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Both Backing plates and latch are 316 Stainless Steel
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

For use with a Door Handle.

• Width: 600mm
• Height: 2041mm
• Thickness: 10mm
• Weight: 31kg
• Can be swung off a wall or a hinge panel

2 required per door

• Glass to Glass Hinge
• Chrome Plated Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards (90 Degrees inwards and Outwards)
• Will hold door at 90 degrees inwards, 90 Degree Outwards and 180 Degrees closed.
• Made from solid brass
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

• 316 Grade Stainless Steel
• M12 thread in the back
• 12mm Thick with Bevelled Cap Finish
• 1mm Thick Washer Included

You will also need to order the correct installation rod

• Installation into Timber will require a Lag Screw to Metric Threaded Rod
• Installation into Masonry will require a Threaded Rod

Use on glass pool fencing.

• Double Friction for easy glass alignment (glass can be adjusted in both directions)

• Includes Cover
• Easy Top Mount Base Plate Installation
• Friction Fit Glass (no holes in glass required)
• Contemporary tapered top to comply with ‘no toe hole’ requirements
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 50mm Front profile
• Base plate has 4x countersunk holes to enable flush fixing
• Tapered packer included (1mm to 1.5mm) to enable tilt adjustment of glass
• Suitable for Glass Pool Fence Applications
• Load test certificates available if required.
• Available in Mirror or Satin finish.

Neatly fits over Base Plate Spigot to cover base plate screws

Neatly fits over core hole or base plate spigot to hide fixing.

• Glass to Glass Latch - Straight Line
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Economy Latch is Black Polymer
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

2 required per door

• 135 Degree Glass to Glass Hinge
• Chrome Plate Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

2 required per door

• 135 Degree Glass to Glass Hinge
• Matt Black Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass

Custom Mitre cut glass required for Hinge Panel

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

• Position: End - When over running top rail to connect to wall.
• Use: Glass Balustrade
• Material: 50x50 Satin Finish Stainless Steel
• Height: 970mm
• Grade: 316 Marine Grade Stainless
• Base: 4 Hole Square Flange
• Top: Perpendicular Joiner
• Glass: Install with 850mm Glass Panels
• Handrail: Install with 50x50 Stainless Handrail

Use on glass pool fencing.

• Double Friction for easy glass alignment (glass can be adjusted in both directions)

• Includes Cover
• Core Hole Installation
• Friction Fit Glass (no holes in glass required)
• Contemporary tapered top to comply with ‘no toe hole’ requirements
• Suits 12mm thick glass
• 2205 Grade Stainless Steel
• 50mm Front profile
• Tapered packer included (1mm to 1.5mm) to enable tilt adjustment of glass
• Suitable for Glass Pool Fence Applications
• Load test certificates available if required.
• Available in Mirror or Satin finish.

• 38mm 5800mm Long Slotted Tube
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• Fits directly onto the top of the glass
• 316 grade Stainless Steel
• 14x14mm Slot
• Install with glazing rubber or silicon directly to the glass
• Available in Mirror or satin finish

• Position: Centre
• Use: Glass Balustrade
• Material: 2" Mirror Finish Tube
• Height: 970mm
• Grade: 316 Marine Grade Stainless
• Base: 3 Hole Round Flange
• Top: Perpendicular Joiner
• Glass: Install with 850mm Glass Panels
• Handrail: Install with 2 Inch Round Stainless Top Rail

The perpendicular joiner is Tek screwed to the underside of the rail then glued and riveted into the top of the post.

2 required per door

• Wall to Glass Hinge
• Chrome Plated Finish
• 4 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

2 required per door

• Offset Wall to Glass Hinge
• Matt Black Finish
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

• 50mm Square Cap
• Suits round and Flat Rails
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Diameter Hole in the Glass
• Use with our pre-drilled 970mm and 1280mm glass panels

For use with a Single Door Knob.

• Width: 610mm
• Height: 2041mm
• Thickness: 10mm
• Weight: 33kg
• Can be swung of the wall or a hinge panel

Square Core Hole Spigot

• Friction Fit - No holes in Glass Required
• Use for Glass Balustrade or Glass Pool Fence
• 2205 Grade Stainless Steel
• Suits 12mm Thick Glass
• 45mm Front profile
• Extension available for extra height or anchoring
• Use for Glass Balustrading or Pool Fencing applications
• Load test certificates available if required.
• Available in Mirror or Satin Finish

Click Here to view our Core Hole Installation Guide

• Joins 2 straight lengths of 38mm Slotted Tube
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

• Position: Corner
• Use: Glass Balustrade
• Material: 2" Mirror Finish Tube
• Height: 970mm
• Grade: 316 Marine Grade Stainless
• Base: 3 Hole Round Flange
• Top: 90 Degree Tee Flush Joiner
• Glass: Install with 850mm Glass Panels
• Handrail: Install with 2 Inch Round Stainless Top Rail

• Position: Centre
• Use: Glass Balustrade
• Material: 50x50 Satin Finish Stainless Steel
• Height: 970mm
• Grade: 316 Marine Grade Stainless
• Base: 4 Hole Square Flange
• Top: 90 Degree Flush Joiner Tee
• Glass: Install with 850mm Glass Panels
• Handrail: Install with 50x50 Stainless Handrail

2 required per door

• Offset Wall to Glass Hinge
• 3 x Fixing Holes
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• "D" Style Glass Cutouts
• Self Closing from approximately 25 Degrees
• Dual Action - opens inwards and outwards
• Made from solid brass
• Fixing Screws included
• Allen Key & Gaskets included

Maximum Door Weight when 2 hinges used is 35kg

Maximum Door Width when 2 hinges used is 800mm

• 38mm Diameter Round Cap
• Suits round or flat rails
• Adjustable Height
• Fixed Saddle
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Hole in the Glass
• Use with our pre-drilled 970mm and 1280mm glass panels

• Glass to Wall/Square Post
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Latch is Black Polymer
• Requires Gate to be drilled (2 x 12mm Holes, 20mm in from edge and 42mm apart)
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and Post/Wall

For use with a Single Door Knob.

• Width: 620mm
• Height: 2041mm
• Thickness: 10mm
• Weight: 35kg
• Can be swung of the wall or a hinge panel

Neatly fits over core hole spigot to hide grout

• Glass to Glass at a 90 Degree External Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Latch is Black Polymer
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

• Width: 1000mm
• Height: 1200mm
• Thickness: 12mm
• Weight: 36kg
• Holes: 4 x 14mm Holes to fix glass gate hinges

Suitable for installation with:

• Friction Spigots
• Deck Mount Channel

Used for:

• Glass Pool Fencing

It can be installed with a Top Mounted Rail

Glass is certified to Australian Standards

Wall Bracket - Matt Black -  For Shower Screen

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

• Wall Bracket
• 3mm Gap between glass and wall
• Matt Black Finish
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

• 50mm Diameter Round Cap
• Suits Round and Flat Rails
• Adjustable Height
• Fixed Saddle
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Diameter Hole in the Glass
• Use with our pre-drilled 970mm and 1280mm glass panels

For use with a Single Door Knob.

• Width: 630mm
• Height: 2041mm
• Thickness: 10mm
• Weight: 37kg
• Can be swung of the wall or a hinge panel

• Joins 38mm Slotted Tube at a 90 degree angle (on a corner)
• Use for Glass Balustrade or Glass Pool Fence Top Rail
• 316 grade Stainless Steel
• Fit by Welding or epoxy glue
• Available in Mirror or satin finish

• 316 Grade Stainless
• Hex Head Drive
• Self Tapping
• 100mm long
• 18mm Outer Diameter Head
• Ideal for use with Square and Round Base Plate Spigots into timber
• 1 pack required per spigot

• Glass to Glass at a 90 Degree Internal Angle Latch
• Use for Glass Pool Fence Gate or Glass Balustrade Gate
• Backing Plates are 316 Stainless Steel
• Latch is Black Polymer
• Requires Gate to be drilled (2 x 10mm Holes, 20mm in from edge and 42mm apart)
• Latch Panel must be 12mm - No holes required
• Suits 8, 10 and 12mm gates
• For best results leave a 9mm gap between the gate and latch panel

Used to fix Hinge and Return/Fixed panels to the wall in a shower screen.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Offset Wall Bracket for Shower Screens
• Chrome Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

Used to fix Hinge and Return/Fixed panels to the wall.

3 Per Panel recommended

These are easier to install then the hidden screw wall bracket. The screw can be marked and installed with the glass standing in place.

• Wall Bracket
• Matt Black Finish
• 3mm Gap between glass and wall
• Square Finish Edges
• Suitable for 8mm & 10mm Glass
• 2 x Compression/Friction screws
• No holes in glass required
• Made from solid brass
• 1 x Fixing screw and Clear Gaskets Provided

Silicon must be used along glass edge when friction brackets used.

Some people also use these along the floor however we do not recommend this as the screw will break the waterproofing membrane, the whole glass weight will be positioned on the bracket rather then spread across the length of the sheet and the glass will be held 3mm off the floor.

• 38mm Diameter Round Cap
• Suits round and flat rails
• Adjustable Height
• Adjustable Saddle
• Includes 3 Saddles 38mm, 50mm and Flat. You can simply change the saddle to use with different profile handrails.
• Requires a 20mm Diameter Hole in the Glass
• Use with our pre-drilled 970mm and 1280mm glass panels